Squid configuration directive host_verify_strict
Available in: v7 v6 v5 v4 3.5 3.4 3.3 3.2
For older versions than v4 see the linked pages above
Configuration Details:
Option Name: | host_verify_strict |
---|---|
Replaces: | |
Requires: | |
Default Value: | host_verify_strict off |
Suggested Config: |
|
Regardless of this option setting, when dealing with intercepted traffic, Squid always verifies that the destination IP address matches the Host header domain or IP (called 'authority form URL'). This enforcement is performed to satisfy a MUST-level requirement in RFC 2616 section 14.23: "The Host field value MUST represent the naming authority of the origin server or gateway given by the original URL". When set to ON: Squid always responds with an HTTP 409 (Conflict) error page and logs a security warning if there is no match. Squid verifies that the destination IP address matches the Host header for forward-proxy and reverse-proxy traffic as well. For those traffic types, Squid also enables the following checks, comparing the corresponding Host header and Request-URI components: * The host names (domain or IP) must be identical, but valueless or missing Host header disables all checks. For the two host names to match, both must be either IP or FQDN. * Port numbers must be identical, but if a port is missing the scheme-default port is assumed. When set to OFF (the default): Squid allows suspicious requests to continue but logs a security warning and blocks caching of the response. * Forward-proxy traffic is not checked at all. * Reverse-proxy traffic is not checked at all. * Intercepted traffic which passes verification is handled according to client_dst_passthru. * Intercepted requests which fail verification are sent to the client original destination instead of DIRECT. This overrides 'client_dst_passthru off'. For now suspicious intercepted CONNECT requests are always responded to with an HTTP 409 (Conflict) error page. SECURITY NOTE: As described in CVE-2009-0801 when the Host: header alone is used to determine the destination of a request it becomes trivial for malicious scripts on remote websites to bypass browser same-origin security policy and sandboxing protections. The cause of this is that such applets are allowed to perform their own HTTP stack, in which case the same-origin policy of the browser sandbox only verifies that the applet tries to contact the same IP as from where it was loaded at the IP level. The Host: header may be different from the connected IP and approved origin. |
|
Introduction
- About Squid
- Why Squid?
- Squid Developers
- How to Donate
- How to Help Out
- Getting Squid
- Squid Source Packages
- Squid Deployment Case-Studies
- Squid Software Foundation
Documentation
- Quick Setup
- Configuration:
- FAQ and Wiki
- Guide Books:
- Non-English
- More...
Support
- Security Advisories
- Bugzilla Database
- Mailing lists
- Contacting us
- Commercial services
- Project Sponsors
- Squid-based products
Miscellaneous
- Developer Resources
- Related Writings
- Related Software:
- Squid Artwork
Web Site Translations
Mirrors
- Website:
- ... full list
- FTP Package Archive