> > "headers: 'GET http://www.server-im-trying-to-get-to.com/ HTTP/1.1"
> squidclient only shows the headers between itself and Squid. Not the
headers
> on the other side of Squid.
But doesn't that GET request above (which I made squidclient print with
the -v flag to see squid's initial request) mean that it's "asking" in
HTTP/1.1? Wouldn't that request end with HTTP/1.0 if it was just asking
in 1.0? Or do I misunderstand something fundamental?
> Squid-2.7 does not send HTTP/1.1 to servers unless you explicitly
> configure it by adding the "http11" option on cache_peer.
OK, noted, thanks.
> Squid-2.7 will also drop 100-continue responses as they arrive.
So I guess that's what is breaking the connection, the 100-continues
being dropped. So, what I'm being told by the support at the remote
site is that the reason it's sending 100-continues to me is because the
client on MY side is making its request in HTTP/1.1. So their server is
obliging, and thus sending back a command which I can't process (or,
that I will drop) on this end and breaking the connection. So it seems,
at least according to them and to what I can tell, that squid IS asking
in 1.1, or something in the request is maybe making their side think
that it is, anyway. BUT, I do see at
http://wiki.squid-cache.org/Http11Checklist that, according to the docs,
Squid is NOT asking in 1.1 and WILL not ask in 1.1 until it is fully
compatible. So that seems to be out (although not third party tested,
according to the link, fwiw). So why is this remote site thinking I'm
1.1 compliant??
> To "fix" 100-continue problems the only solution is to enable the
HTTP/1.1
> feature handling of Expect: headers. 2.7 has enough support enabled by
> default with the ignore_expect100 directive being turned OFF to drop the
> Expect: header out of transactions and "fix" any problems it would
have caused.
Well, it seems the default for ignore_expect100 is what I want, based on
http://www.squid-cache.org/Doc/config/ignore_expect_100/. So it seems
there are three possibilities:
1) Something in the squid request is making it "seem" like it's asking
in 1.1 or
2) Something on the remote side I'm connecting to is incorrectly
deciding that I am 1.1 compliant or
3) The remote side is only HTTP/1.1 compliant and so I am out of luck. :/
I may have to talk more with the remote side of things unless you, Amos,
or anyone else has any thoughts or suggestions. Thanks for all of your
input so far!
David
Received on Fri Jul 08 2011 - 16:14:04 MDT
This archive was generated by hypermail 2.2.0 : Sun Jul 10 2011 - 12:00:02 MDT