Re: perhaps OT: problem compiling 3.1.6 on SLES10-SP3

Amos Jeffries wrote:
> On Mon, 23 Aug 2010 16:42:46 +0200, Christian <chris_at_computersalat.de>
> wrote:
>> Hi,
>>
>> maintaining the squid3 RPM on build.openuse.org.
>> 3.1.4 was the last version I was able to compile without problems.
>> for 3.1.5 I need to apply a small patch. (squid-bootstrap.patch)
>> since 3.1.6 I not able to compile it for SLES10-SP3
>>
>> while using ...
>> ----snip spec----
>> %build
>> export CFLAGS="$RPM_OPT_FLAGS -fPIE -fPIC -fno-strict-aliasing"
>> export CXXFLAGS="$RPM_OPT_FLAGS -fPIC -fno-strict-aliasing"
>> export LDFLAGS='-pie'
>> ./bootstrap.sh
>> autoreconf -fiv
>> ./configure --prefix=/usr \
>> ....
>> -----snip----
>>
>> I get:
>> + ./bootstrap.sh
>> automake (1.9) : automake
>> autoconf (2.59) : autoconf
>> libtool (1.5) : libtool
>> libtool path : /usr/bin
>> Bootstrapping
>> compat/Makefile.am:12: Libtool library used but `LIBTOOL' is undefined
>> compat/Makefile.am:12:
>> compat/Makefile.am:12: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> compat/Makefile.am:12: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/Makefile.am:153: Libtool library used but `LIBTOOL' is undefined
>> src/Makefile.am:153:
>> src/Makefile.am:153: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/Makefile.am:153: to `configure.in' and run `aclocal' and `autoconf'
>> again.
>> src/acl/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
>> src/acl/Makefile.am:4:
>> src/acl/Makefile.am:4: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/acl/Makefile.am:4: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/adaptation/Makefile.am:15: Libtool library used but `LIBTOOL' is
>> undefined
>> src/adaptation/Makefile.am:15:
>> src/adaptation/Makefile.am:15: The usual way to define `LIBTOOL' is to
>> add `AC_PROG_LIBTOOL'
>> src/adaptation/Makefile.am:15: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/adaptation/ecap/Makefile.am:4: Libtool library used but `LIBTOOL' is
>> undefined
>> src/adaptation/ecap/Makefile.am:4:
>> src/adaptation/ecap/Makefile.am:4: The usual way to define `LIBTOOL' is
>> to add `AC_PROG_LIBTOOL'
>> src/adaptation/ecap/Makefile.am:4: to `configure.in' and run `aclocal'
>> and `autoconf' again.
>> src/adaptation/icap/Makefile.am:4: Libtool library used but `LIBTOOL' is
>> undefined
>> src/adaptation/icap/Makefile.am:4:
>> src/adaptation/icap/Makefile.am:4: The usual way to define `LIBTOOL' is
>> to add `AC_PROG_LIBTOOL'
>> src/adaptation/icap/Makefile.am:4: to `configure.in' and run `aclocal'
>> and `autoconf' again.
>> src/auth/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined
>> src/auth/Makefile.am:7:
>> src/auth/Makefile.am:7: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/auth/Makefile.am:7: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/base/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
>> src/base/Makefile.am:5:
>> src/base/Makefile.am:5: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/base/Makefile.am:5: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/esi/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
>> src/esi/Makefile.am:4:
>> src/esi/Makefile.am:4: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/esi/Makefile.am:4: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/fs/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
>> src/fs/Makefile.am:3:
>> src/fs/Makefile.am:3: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/fs/Makefile.am:3: to `configure.in' and run `aclocal' and `autoconf'
>> again.
>> src/icmp/Makefile.am:25: Libtool library used but `LIBTOOL' is undefined
>> src/icmp/Makefile.am:25:
>> src/icmp/Makefile.am:25: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/icmp/Makefile.am:25: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/ident/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
>> src/ident/Makefile.am:4:
>> src/ident/Makefile.am:4: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/ident/Makefile.am:4: to `configure.in' and run `aclocal' and
>> `autoconf' again.
>> src/ip/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
>> src/ip/Makefile.am:4:
>> src/ip/Makefile.am:4: The usual way to define `LIBTOOL' is to add
>> `AC_PROG_LIBTOOL'
>> src/ip/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf'
>> again.
>> automake failed
>> Autotool bootstrapping failed. You will need to investigate and correct
>> before you can develop on this source tree
>> error: Bad exit status from /var/tmp/rpm-tmp.56670 (%build)
>>
>> and without doing
>> ./bootstrap.sh
>> autoreconf -fiv
>>
>> compile fails with:
>> g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\"
>> -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\"
>> -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../src
>> -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings
>> -Wcomments -Werror -D_REENTRANT -m64 -fmessage-length=0
>> -D_FORTIFY_SOURCE=2 -O2 -Wall -fPIC -fno-strict-aliasing -MT
>> LoadableModule.o -MD -MP -MF $depbase.Tpo -c -o LoadableModule.o
>> LoadableModule.cc &&\
>> mv -f $depbase.Tpo $depbase.Po
>> In file included from ../libltdl/ltdl.h:37,
>> from LoadableModule.cc:10:
>> ../libltdl/libltdl/lt_error.h:35:31: error: libltdl/lt_system.h: No such
>> file or directory
>> depbase=`echo LoadableModules.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
>> g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\"
>> -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\"
>> -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../src
>> -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings
>> -Wcomments -Werror -D_REENTRANT -m64 -fmessage-length=0
>> -D_FORTIFY_SOURCE=2 -O2 -Wall -fPIC -fno-strict-aliasing -MT
>> LoadableModules.o -MD -MP -MF $depbase.Tpo -c -o LoadableModules.o
>> LoadableModules.cc &&\
>> mv -f $depbase.Tpo $depbase.Po
>> make[3]: *** [LoadableModule.o] Error 1
>> make[3]: *** Waiting for unfinished jobs....
>> make[3]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
>> make[2]: *** [all-recursive] Error 1
>> make[2]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
>> make[1]: *** [all] Error 2
>> make[1]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
>> make: *** [all-recursive] Error 1
>> error: Bad exit status from /var/tmp/rpm-tmp.31135 (%build)
>>
>>
>> THX for any help
>
> Hi Christian,
> Sorry about that we have had a few teething problems with the shift to
> libtool-2.x.
> This patch may help a bit:
> http://west.squid-cache.org/Versions/v3/3.1/changesets/squid-3.1-10057.patch
>
> Alex seemed to have problems even then after bootstrapping with libtool
> 1.5, so 2.0.9+ may be a hard requirement now for use of bootstrap.sh
>
>
> In other areas, we have a bug open reporting that -fPIE does not work. Do
> you have any patches etc for that option?
>
> Amos

FYI: 3.1.7 is now available with the fix for those LoadableModules
problems in it.

Amos

-- 
Please be using
   Current Stable Squid 2.7.STABLE9 or 3.1.6
   Beta testers wanted for 3.2.0.1