Re: perhaps OT: problem compiling 3.1.6 on SLES10-SP3

On Mon, 23 Aug 2010 16:42:46 +0200, Christian <chris_at_computersalat.de>
wrote:
> Hi,
>
> maintaining the squid3 RPM on build.openuse.org.
> 3.1.4 was the last version I was able to compile without problems.
> for 3.1.5 I need to apply a small patch. (squid-bootstrap.patch)
> since 3.1.6 I not able to compile it for SLES10-SP3
>
> while using ...
> ----snip spec----
> %build
> export CFLAGS="$RPM_OPT_FLAGS -fPIE -fPIC -fno-strict-aliasing"
> export CXXFLAGS="$RPM_OPT_FLAGS -fPIC -fno-strict-aliasing"
> export LDFLAGS='-pie'
> ./bootstrap.sh
> autoreconf -fiv
> ./configure --prefix=/usr \
> ....
> -----snip----
>
> I get:
> + ./bootstrap.sh
> automake (1.9) : automake
> autoconf (2.59) : autoconf
> libtool (1.5) : libtool
> libtool path : /usr/bin
> Bootstrapping
> compat/Makefile.am:12: Libtool library used but `LIBTOOL' is undefined
> compat/Makefile.am:12:
> compat/Makefile.am:12: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> compat/Makefile.am:12: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/Makefile.am:153: Libtool library used but `LIBTOOL' is undefined
> src/Makefile.am:153:
> src/Makefile.am:153: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/Makefile.am:153: to `configure.in' and run `aclocal' and `autoconf'
> again.
> src/acl/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
> src/acl/Makefile.am:4:
> src/acl/Makefile.am:4: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/acl/Makefile.am:4: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/adaptation/Makefile.am:15: Libtool library used but `LIBTOOL' is
> undefined
> src/adaptation/Makefile.am:15:
> src/adaptation/Makefile.am:15: The usual way to define `LIBTOOL' is to
> add `AC_PROG_LIBTOOL'
> src/adaptation/Makefile.am:15: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/adaptation/ecap/Makefile.am:4: Libtool library used but `LIBTOOL' is
> undefined
> src/adaptation/ecap/Makefile.am:4:
> src/adaptation/ecap/Makefile.am:4: The usual way to define `LIBTOOL' is
> to add `AC_PROG_LIBTOOL'
> src/adaptation/ecap/Makefile.am:4: to `configure.in' and run `aclocal'
> and `autoconf' again.
> src/adaptation/icap/Makefile.am:4: Libtool library used but `LIBTOOL' is
> undefined
> src/adaptation/icap/Makefile.am:4:
> src/adaptation/icap/Makefile.am:4: The usual way to define `LIBTOOL' is
> to add `AC_PROG_LIBTOOL'
> src/adaptation/icap/Makefile.am:4: to `configure.in' and run `aclocal'
> and `autoconf' again.
> src/auth/Makefile.am:7: Libtool library used but `LIBTOOL' is undefined
> src/auth/Makefile.am:7:
> src/auth/Makefile.am:7: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/auth/Makefile.am:7: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/base/Makefile.am:5: Libtool library used but `LIBTOOL' is undefined
> src/base/Makefile.am:5:
> src/base/Makefile.am:5: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/base/Makefile.am:5: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/esi/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
> src/esi/Makefile.am:4:
> src/esi/Makefile.am:4: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/esi/Makefile.am:4: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/fs/Makefile.am:3: Libtool library used but `LIBTOOL' is undefined
> src/fs/Makefile.am:3:
> src/fs/Makefile.am:3: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/fs/Makefile.am:3: to `configure.in' and run `aclocal' and `autoconf'
> again.
> src/icmp/Makefile.am:25: Libtool library used but `LIBTOOL' is undefined
> src/icmp/Makefile.am:25:
> src/icmp/Makefile.am:25: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/icmp/Makefile.am:25: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/ident/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
> src/ident/Makefile.am:4:
> src/ident/Makefile.am:4: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/ident/Makefile.am:4: to `configure.in' and run `aclocal' and
> `autoconf' again.
> src/ip/Makefile.am:4: Libtool library used but `LIBTOOL' is undefined
> src/ip/Makefile.am:4:
> src/ip/Makefile.am:4: The usual way to define `LIBTOOL' is to add
> `AC_PROG_LIBTOOL'
> src/ip/Makefile.am:4: to `configure.in' and run `aclocal' and `autoconf'
> again.
> automake failed
> Autotool bootstrapping failed. You will need to investigate and correct
> before you can develop on this source tree
> error: Bad exit status from /var/tmp/rpm-tmp.56670 (%build)
>
> and without doing
> ./bootstrap.sh
> autoreconf -fiv
>
> compile fails with:
> g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\"
> -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\"
> -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../src
> -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings
> -Wcomments -Werror -D_REENTRANT -m64 -fmessage-length=0
> -D_FORTIFY_SOURCE=2 -O2 -Wall -fPIC -fno-strict-aliasing -MT
> LoadableModule.o -MD -MP -MF $depbase.Tpo -c -o LoadableModule.o
> LoadableModule.cc &&\
> mv -f $depbase.Tpo $depbase.Po
> In file included from ../libltdl/ltdl.h:37,
> from LoadableModule.cc:10:
> ../libltdl/libltdl/lt_error.h:35:31: error: libltdl/lt_system.h: No such
> file or directory
> depbase=`echo LoadableModules.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
> g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"/etc/squid/squid.conf\"
> -DDEFAULT_SQUID_DATA_DIR=\"/usr/share/squid\"
> -DDEFAULT_SQUID_CONFIG_DIR=\"/etc/squid\" -I.. -I../include -I../src
> -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings
> -Wcomments -Werror -D_REENTRANT -m64 -fmessage-length=0
> -D_FORTIFY_SOURCE=2 -O2 -Wall -fPIC -fno-strict-aliasing -MT
> LoadableModules.o -MD -MP -MF $depbase.Tpo -c -o LoadableModules.o
> LoadableModules.cc &&\
> mv -f $depbase.Tpo $depbase.Po
> make[3]: *** [LoadableModule.o] Error 1
> make[3]: *** Waiting for unfinished jobs....
> make[3]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory `/usr/src/packages/BUILD/squid-3.1.6/src'
> make: *** [all-recursive] Error 1
> error: Bad exit status from /var/tmp/rpm-tmp.31135 (%build)
>
>
> THX for any help

Hi Christian,
 Sorry about that we have had a few teething problems with the shift to
libtool-2.x.
This patch may help a bit:
http://west.squid-cache.org/Versions/v3/3.1/changesets/squid-3.1-10057.patch

Alex seemed to have problems even then after bootstrapping with libtool
1.5, so 2.0.9+ may be a hard requirement now for use of bootstrap.sh

In other areas, we have a bug open reporting that -fPIE does not work. Do
you have any patches etc for that option?

Amos
Received on Mon Aug 23 2010 - 22:46:01 MDT