Re: [squid-users] Unbalaned Cpu cores with squid 3.4.3 with centos 6.4 64 bit

Hi,

Feel free to use 24 workers. There should not be deficiency in squid
performance.
For better performance, use cpu_affinity_map configuration directive to
bind each squid worker to dedicated cpu core explicitly.

Best wishes,
Pavel

On 02/12/2014 05:29 PM, Dr.x wrote:
> hi all ,
>
> ive tried cenots6.4 64 bit with32 G ram with squid 3.4.3 with tptoxy ,
>
> but
>
> the cpu cores are not balanced !!!
> this machine is delr720 it has 24 cores ,
>
> before i go to try on this machine, i tried it on quad core machine with
> same config squid file and it gave me equal sharing among 8 cores of cpu .
>
> but when i tried the same config and same kernel and same squid and same os
> on delr720 which has 24 cores cpu ,
> i found that process of squid are only distributed on about 5 cores from
> total of 25 core !!!!!
>
> my question is ,
> does squid depend on hardware core cpu ? does that mean squid SMP
> compatibale with some hardware and not with others ???
>
> ======================================
> ive pumped about 1000 ips to squid
> and here is a snapshot with cores which are un balanced !
> those are cores of delr720
> <http://squid-web-proxy-cache.1019090.n4.nabble.com/file/n4664748/829718907.png>
>
> i have only 4 workers and dont wanto to increase them , because i think if i
> increased them i will have low bw utilization .
>
> ===================================================
> here is last of dmesg file log :
>
>> EXT4-fs (sda1): re-mounted. Opts: (null)
>> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
>> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>> iTCO_vendor_support: vendor-support=0
>> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>> perf_event_intel: PEBS enabled due to microcode update
>> microcode: CPU23 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU22 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU21 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU20 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU19 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU18 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU17 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU16 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU15 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU14 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU13 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU12 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU11 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU10 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU9 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU8 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU7 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU6 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU5 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU4 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU3 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU2 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU1 updated to revision 0x710, date = 2013-06-17
>> microcode: CPU0 updated to revision 0x710, date = 2013-06-17
>> microcode: Microcode Update Driver: v2.00
>> &lt;
>> tigran_at_aivazian.fsnet.co.uk
>> &gt;
>> , Peter Oruba
>> microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
>> microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
> ========================================
> [root_at_squid ~]# cat /etc/redhat-release
> CentOS release 6.5 (Final)
> [root_at_squid ~]# uname -a
> Linux squid.ps 3.7.5 #1 SMP Tue Feb 11 21:31:21 EET 2014 x86_64 x86_64
> x86_64 GNU/Linux
> [root_at_squid ~]#
> ==================================================================
> [root_at_squid ~]# cat /etc/squid/squid.conf
>
>> #################################################################
>> # Example rule allowing access from your local networks.
>> # Adapt to list your (internal) IP networks from where browsing
>> # should be allowed
>> acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
>> acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
>> acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
>> acl localnet src fc00::/7 # RFC 4193 local private network range
>> acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged)
>> machines
>> acl mysubnet src xxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> acl eliezer src xxxxxxxxxxxxxxxxxxxx
>> acl localip src xxxxxxxxx
>> acl SSL_ports port 443
>> acl Safe_ports port 80 # http
>> acl Safe_ports port 21 # ftp
>> acl Safe_ports port 443 # https
>> acl Safe_ports port 70 # gopher
>> acl Safe_ports port 210 # wais
>> acl Safe_ports port 1025-65535 # unregistered ports
>> acl Safe_ports port 280 # http-mgmt
>> acl Safe_ports port 488 # gss-http
>> acl Safe_ports port 591 # filemaker
>> acl Safe_ports port 777 # multiling http
>> acl CONNECT method CONNECT
>> ######################################################
>> # Recommended minimum Access Permission configuration:
>> # Deny requests to certain unsafe ports
>> ##########################################################
>> ##############################################################
>> http_access deny !Safe_ports
>> http_access allow localnet
>> # Deny CONNECT to other than secure SSL ports
>> http_access deny CONNECT !SSL_ports
>> #######################################################
>> ###########SMP oPTIONS#####################
>> dns_v4_first on
>> workers 4
>> ########################################################
>> #cpu_affinity_map process_numbers=1,2,3,4 cores=2,4,6,8
>> #http_port 127.0.0.1:400${process_number}
>> #http_port ::1:66000
>> #########################################
>> visible_hostname xxxxxxxxxxxxxxxx
>> ####################################################
>> ####Filterring##############
>> acl blockkeywords dstdomain "/etc/squid/xxxxxxxxxxx"
>> http_access deny blockkeywords
>> #################################################
>> cache_log /var/log/squid/cache.log
>> access_log /var/log/squid/access.log
>> ###############################################
>> http_port ffffff:xxxx
>> http_port dddddd:eeeeeeeeeee tproxy
>> ############################################################################
>> http_access allow mysubnet
>> ############################################################################################
>> cache_mgr xxxxxxxxxxxxxxxxxxxxx
>> cachemgr_passwd xxxxxxxxxxxxxxxxxxxx all
>> #######################################################
>> # add user authentication and similar options here
>> http_access allow manager localhost
>> http_access allow manager localip
>> http_access allow manager mysubnet
>> http_access allow mysubnet manager
>> http_access deny manager
>> #######################################################################
>> cache_mem 3000 MB
>> maximum_object_size_in_memory 10 MB
>> #########################################################
>> quick_abort_pct 95
>> fqdncache_size 65535
>> ipcache_size 65535
>> ###########################################################
>> ipcache_low 98
>> ipcache_high 99
>> #####################################################
>> ########### WCCP2 Config#############
>> wccp2_router x.x.x.x
>> wccp_version 1
>> wccp2_forwarding_method 2
>> wccp2_return_method 2
>> wccp2_assignment_method 2
>> wccp2_service dynamic 60
>> wccp2_service_info 60 protocol=tcp flags=src_ip_hash priority=250 ports=80
>> wccp2_service dynamic 70
>> wccp2_service_info 70 protocol=tcp flags=dst_ip_hash,ports_source
>> priority=250 ports=80
>> ######################################################
>> cache_effective_user squid
>> cache_effective_group squid
>> #######################################################
>> memory_replacement_policy heap GDSF
>> cache_replacement_policy heap LFUDA
>> #####################################################
>> dns_nameservers x.x.x.x 8.8.8.8
>> #######################################################
>> http_access deny all
>> ##############################
>> refresh_pattern ^ftp: 1440 20% 10080
>> refresh_pattern ^gopher: 1440 0% 1440
>> refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
>> refresh_pattern . 0 20% 4320
>> ####################################################
>> memory_pools off
>> pconn_timeout 2 minutes
>> persistent_request_timeout 1 minute
>> #####################
>> max_filedesc 131072
>
> *any help ????
> any suggestion ????*
>
>
>
>
>
>
> -----
> Dr.x
> --
> View this message in context:http://squid-web-proxy-cache.1019090.n4.nabble.com/Unbalaned-Cpu-cores-with-squid-3-4-3-with-centos-6-4-64-bit-tp4664748.html
> Sent from the Squid - Users mailing list archive at Nabble.com.
Received on Wed Feb 12 2014 - 14:39:52 MST