Re: [squid-users] Squid wont work when removing DG

On 2014-01-22 03:14, Scott Mayo wrote:
> I have run a DG/Squid setup for quite some time. I am having problems
> with slowness. It seems DG has too many processes open. I wanted to
> test this to remove DG from the mix.
>
> DG listens on 8080 and Squid on 3128. I have it set to authenticate
> users.
>
> Since I wanted to test I did the following:
> 1. Edited squid.conf to listen on 8080
> 2. Stopped DG
> 3. Restarted squid 'squid -k reconfigure'
>
> After that did not work I even set squid.conf back to listening to
> port 3128 and had my test client proxy settings changed to 3128
> instead of 8080. I even cleared my squid cache out.

It sounds like you have access control problems. When removing DG you
also need to make Squid do whatever controls DG was doing (or ensure
omitted rules were not actually needed for connectivity), and remove
anything in squid.conf which was specifically for DG (such as only
allowing traffic from the IP address used by DG).

Perhapse if you would share your squid.conf we could be a bit more
helpful.

Amos
Received on Tue Jan 21 2014 - 20:46:16 MST