hi ,
ive compiled squid 3.3.8 ,
here is snmp config in squid.conf :
#######SNMP Config###########################
acl snmppublic snmp_community squidsquid
snmp_port 3401
snmp_access allow snmppublic all
snmp_incoming_address 0.0.0.0
snmp_outgoing_address 0.0.0.0
#
#############################################################
here is testting squid snmp with snmpwalk :
root_at_drx:~# snmpwalk -m /usr/share/squid3/mib.txt -v2c -Cc -c squidsquid
x.x.x.6:3401 .1.3.6.1.4.1.3495.1.1
SQUID-MIB::cacheSysVMsize.0 = INTEGER: 224
SQUID-MIB::cacheSysStorage.0 = INTEGER: 92148
SQUID-MIB::cacheUptime.0 = Timeticks: (4283794) 11:53:57.94
root_at_drx:~#
root_at_drx:~#
##############################################
as we see above , snmpwalk sounds good and snmp is fine ,
now im trying to graph this values on PRTG Monitor software based windows .
i just want help how to graph this values on that software ???
on the prtg monitor software i put the ip and snmp key , but it only showed
general sensors ?
<http://squid-web-proxy-cache.1019090.n4.nabble.com/file/n4661568/KMk7J.png>
i tried to add sensors bu conveting squid mib text file "here is link where
i got squid mib " to snmp libraray but it failed to get loaded ??
here is squid snmp mib sample :
"http://bazaar.launchpad.net/~squid/squid/3.1/view/head:/src/mib.txt
any one did it on prtg ???
wish to help
regards
-----
Mr.Ahmad
-- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Need-help-with-squid-snmp-with-PRTG-Monitor-MIB-and-Oidlib-tp4661568.html Sent from the Squid - Users mailing list archive at Nabble.com.Received on Thu Aug 15 2013 - 07:45:02 MDT
This archive was generated by hypermail 2.2.0 : Mon Aug 19 2013 - 12:00:25 MDT