[squid-users] big log files"cache.log " cause squid to get down !!

hi ,
i have a problem which is the long log files of squid such as :
access.log
cache.log
store.log

get high sizes like 500 G which cause the squid partition to be full and
squid to get down .

my question is how to set limit size for log file and if that size exceeded
i want new logs to replace the old logs on the same file and not exceed ??
=====================================================

here is my squid.conf file :
acl blockkeywords dstdomain "/etc/squid3/squid-porn.acl"
http_access deny blockkeywords
####################################################
#######################################################################
#
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
#################################################################################
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged)
machines
acl mysubnet src xxxxxxxxxxxxxx
http_access allow mysubnet
###################################################################################
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
######################################################
#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager
################################################
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
###################################################################
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
#####################################################################
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
##################################################################
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
###################################################################
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
##############################################################
# And finally deny all other access to this proxy
http_access deny all
###########################################################
# Squid normally listens to port 3128
http_port xxxxx
http_port xxxx
http_port 1xxxx tproxy
#http_port xxxx
#http_port xxxxx tproxy
###########################################################
# We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?
###############################################################
# Uncomment and adjust the following to add a disk cache directory.
cache_dir aufs /cache1 150000 32 256
cache_dir aufs /cache2 150000 32 256
cache_dir aufs /cache3 150000 32 256
#cache_dir ufs /var/spool/squid3 100 16 256
###########################################################
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
###############################################################
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
###############################################################
cache_mem 500 MB
########### WCCP2 Config#############
wccp2_router xxxxxxxxxxxxx
wccp_version 2
wccp2_forwarding_method 2
wccp2_return_method 2
wccp2_service dynamic 80
wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240 ports=80
wccp2_service dynamic 90
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80
###################################################################
dns_nameservers x.x.x.x
cache_effective_user virus
cache_effective_group virus
visible_hostname virus

##########################################
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
maximum_object_size_in_memory 64 KB
###########################################
max_filedescriptors 65536
max_open_disk_fds 65536
###############################
################################
cache_swap_low 98
cache_swap_high 99
===============================
cache_store_log /var/log/squid/store.log

regards

--
View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/big-log-files-cache-log-cause-squid-to-get-down-tp4659395.html
Sent from the Squid - Users mailing list archive at Nabble.com.