I am getting the following error when chaining qlproxy and squidclamav
services. If I was to configure just qlproxy or just squidclamav
service, it works. Note, this is a rare case as for the most part
everything works fine. I am guessing because I hit mixed content
(http and https). The configuration is below.
ICAP protocol error.
The system returned: (100004) Unknown error 100004
This means that some aspect of the ICAP communication failed.
Some possible problems are:
The ICAP server is not reachable.
An Illegal response was received from the ICAP server.
-------------------------------------------------------------------------------------------------------------
The squid config...
icap_enable on
icap_send_client_ip on
icap_send_client_username on
icap_client_username_encode off
icap_client_username_header X-Authenticated-User
icap_preview_enable on
icap_preview_size 1024
icap_service_failure_limit -1
icap_service_revival_delay 30
icap_service qlproxy1 reqmod_precache bypass=0 icap://127.0.0.1:1344/reqmod
icap_service qlproxy2 respmod_precache bypass=0 icap://127.0.0.1:1344/respmod
icap_service squidclamav1 reqmod_precache bypass=0
icap://127.0.0.1:1345/squidclamav
icap_service squidclamav2 respmod_precache bypass=0
icap://127.0.0.1:1345/squidclamav
adaptation_service_chain svcRequest qlproxy1 squidclamav1
adaptation_service_chain svcResponse qlproxy2 squidclamav2
adaptation_access svcRequest allow all
adaptation_access svcResponse allow all
Thanks in advance
Received on Sun Oct 14 2012 - 13:39:31 MDT
This archive was generated by hypermail 2.2.0 : Mon Oct 15 2012 - 12:00:03 MDT