Hi All,
I successfully resolved this problem.
Thanks,
Benjamin
On Wed, Oct 12, 2011 at 8:01 PM, benjamin fernandis
<benjo11111_at_gmail.com> wrote:
> Hi
>
>
> Please guide me to clear my queries.
>
>
> Thanks,
> Benjamin
>
> On Tue, Oct 11, 2011 at 7:22 PM, benjamin fernandis
> <benjo11111_at_gmail.com> wrote:
>> Hi All,
>>
>> We have requirement to configure squid to deploy with cisco wccp2.
>>
>> I have some confusion regarding configuration, kindly clear my queries
>> and guide me to configure it.
>>
>>
>> My current network senario:
>>
>> Wan side cisco 7200 router ( wan ip 84.24.xx.xx ) ( lan ip
>> 149.255.xx.xx) ( lan ip is bgp routed ip pool )
>> |
>> |
>> switch ---------------------squid box ( one
>> interface only ip : 149.255.xx.19) ( gateway ip is router lan ip )
>> |
>> |
>> End Users
>>
>>
>> Now i need to configure squid to use with wccp.
>>
>>
>>
>> i tried to find reference document from google and squid wiki. But i
>> have some queries,
>>
>>
>> what is remote ip while configuring ip tunnel in squid and local ip ?
>>
>> as per my current configuration i tried : remote ip is router wan ip (
>> 84.24.xx.xx) and local ip is squd ip ( 149.255.xx.xx )
>>
>>
>> is it correct one ?
>>
>>
>> and what is the wccp2_router router ip in squid.conf
>>
>> i used 149.255.xx.xx ( router lan ip )
>>
>> is it correct one ?
>>
>>
>> ---------------------------------------------------------------------------------
>> test 1
>>
>> actually i tried to configure router loop back ip on tunnel remote and
>> squid ip as local ip on tunnel but that time i can see traffic on wccp
>> interface and traffic on iptables nat redirection rule but no traffic
>> in squid access.log and surfing is not working.
>>
>> ------------------------------------------------------------------------------------------------
>>
>> So please guide me , what could be right configuration while going to
>> use squid with wccp2.
>>
>>
>> OS: fedora 15
>> squid : 3.1.14
>>
>>
>> Regards,
>> Benjo
>>
>
Received on Thu Oct 13 2011 - 16:01:05 MDT
This archive was generated by hypermail 2.2.0 : Thu Oct 13 2011 - 12:00:04 MDT