Re: [squid-users] Migrating from iPlanet Web Proxy Server

From: Kinkie <gkinkie_at_gmail.com>
Date: Tue, 5 Jul 2011 17:05:08 +0200

Hi,

On Tue, Jul 5, 2011 at 3:01 PM, Marcin J. Kraszewski <marcin_at_ncf.ca> wrote:
> Hi
>
> I will be getting rid of an old version of iPlanet Web Proxy Server. I
> would like to replace it with squid. I don't have any experience with
> squid, so here are a few questions regarding its capabilities.
>
> I need to do the following:
>
> . limit access to documents or sites based on individual users, groups,
> IP addresses, host names or wild card expressions

http://wiki.squid-cache.org/HelpOnAccessControlLists

> . route traffic to appropriate web site or proxy server

Routing to web site is a basic operation, no need for special config
For proxy-to-proxy routing, you can see
http://wiki.squid-cache.org/Features/CacheHierarchy
or more in general
http://wiki.squid-cache.org/?action=fullsearch&context=180&value=cache_peer&fullsearch=Text

> . filter objectionable URLs and content, including viruses, HTML tags
> and ActixeX content

You need an ICAP service for that. There are many commercial and some
free offerings for that.

> . reduce network traffic by caching

Basic built-in feature.

> I have three networks separated by a firewall running HTTP Proxy.
> Traffic from each of the networks goes through that firewall and then
> is chained to the DMZ Proxy Server (squid) before being routed to the
> appropriate web server (no Internet access).
>
> Is squid a good match for this project? Thank you very much for your
> input.

I don't know if I'd run a proxy on the firewall, but if it fits your
performance needs, certainly.
Are you running a transparent proxy or is it just hosted on the same
machine as the firewall?

-- 
    /kinkie
Received on Tue Jul 05 2011 - 15:05:17 MDT

This archive was generated by hypermail 2.2.0 : Wed Jul 06 2011 - 12:00:01 MDT