Please read the description of the coss type in cache_dir carefully.
The 2.7 docs is found here
http://www.squid-cache.org/Versions/v2/2.7/cfgman/cache_dir.html if you
prefer reading them online.
sön 2009-09-06 klockan 23:47 -0700 skrev pokeman:
>
> confuse to define coss parameter in squid.conf
>
> cache_dir coss /cache1 120000 max-size=524288 block-size=64
>
> mount point= /cache1
> harddisk size 120 GB= 120000
> max-size object= ?
> block-size = ?
>
>
> Henrik Nordstrom-5 wrote:
> >
> > sön 2009-09-06 klockan 07:26 -0700 skrev pokeman:
> >> Thanks henrik for your tip can you guide me what is the recomended
> >> setting
> >> for coss .2ndly currenly i am using aufs . after enabling coss what
> >> heppen
> >> with store cache object. coss required to use clean disk .
> >
> > You can use both coss & aufs on the same drive. To keep config clean
> > just move the aufs data down to a folder below the root of that disk.
> >
> > cd /cache
> > mkdir aufs
> > mv ?? swap.state* aufs
> > mkdir coss1
> > [repeat for as many coss stores you need]
> >
> > then reconfigure squid as appropriate.
> >
> > Regards
> > Henrik
> >
> >
> >
>
Received on Mon Sep 07 2009 - 22:15:50 MDT
This archive was generated by hypermail 2.2.0 : Tue Sep 08 2009 - 12:00:02 MDT