[squid-users] Re: Re: Kerberos Authentication - Squid 3.1.0.13

The config.log file is in helpers/negotiate_auth/squid_kerb_auth/ . 3.1
runs a configure in that directory. Not sure if it should be moved into the
main configure as now done in 2.7 and 3.0.

Markus

"Amos Jeffries" <squid3_at_treenet.co.nz> wrote in message
news:4A862FB9.6050301_at_treenet.co.nz...
> Daniel wrote:
>> Markus,
>>
>> First, please correct me if I'm wrong but I looked for 'gssapi.h' in
>> config.log and I'm assuming that config.log contains all the log
>> information
>> from doing a /configure? Assuming that I am correct, I couldn't find
>> 'gssapi' anywhere inside the log file so I'm not sure if that's a good
>> thing
>> or a bad thing.
>
> bad.
> config.log is supposed to contain a full dump of the output of ./configure
> when it was last run.
>
>>
>> I went ahead and dumped the output of the ./configure to a file and these
>> are the only lines that I could find for gssapi.h:
>>
>> checking gssapi.h usability... no
>> checking gssapi.h presence... no
>> checking for gssapi.h... no
>> checking gssapi/gssapi.h usability... no
>> checking gssapi/gssapi.h presence... no
>> checking for gssapi/gssapi.h... no
>>
>> If there's anything else that I could try, I'd greatly appreciate it.
>> Thanks!
>
> You could try installing the gssapi development libraries on your build
> machine. (sometimes called libkrb or libkrb5). Then re-running ./configure
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE6 or 3.0.STABLE18
> Current Beta Squid 3.1.0.13
>
Received on Sat Aug 15 2009 - 11:05:45 MDT