Re: [squid-users] Limit Download Accelerators using req_header and maxconn

molybtek wrote:
>
> Chris Robertson-2 wrote:
>
>> This is getting a bit off the path of your original question, but...
>>
>> Have you changed quick_abort_min, quick_abort_max or quick_abort_pct?
>> How about read_ahead_gap?
>>
>> Delay pools should not download from the 'net faster than the data is
>> delivered to the client*.
>>
>> Chris
>>
>> * If the client cancels the request, but the quick_abort_(min|max|pct)
>> directive causes Squid to finish downloading the object, the delay pool
>> is no longer used.
>>
>>
>>
> The Quick abort settings I have are as follows:
> quick_abort_min 4 KB
> quick_abort_max 4 KB
> quick_abort_pct 98
>
> Read ahead gap is not set, so default to 16kb.
>
> Should I set them to zero or are the current settings okay?
>

Those all look fine. One other directive that might cause issues is
range_offset_limit. An other would be the "no-delay" argument to
cache_peer.

Chris
Received on Thu May 07 2009 - 22:55:48 MDT