Re: [squid-users] How to enable transparent proxy (squid-3.0.STABLE13)

M. Asghar Nazir wrote:
> Dear Amos!
>
> I want to setup same setup same setup like in version 2.5 using these commands written bellow.
>
> httpd_accel_host
> httpd_accel_port
> httpd_accel_with_proxy
> httpd_accel_uses_host_header
>
> and add prerouting rule to redirect all tcp 80 traffic to squid port 3128.

these "prerouting rule" probably stay unchanged.

>
> Because I don't want to setup proxy setting on all of my lan users computers. if any user want to brows the internet port 80 req redirect it to squid port 3128.
>
> And I really don't have any idea how to setup in new version of squid 3.0. please advise

okay, that is a simple intercepting proxy.

drop the httpd_accel garbage.
add "transparent" to end of "http_port 3128" line in squid.conf

Amos

>
> ----- Original Message ----
> From: Amos Jeffries <squid3_at_treenet.co.nz>
> To: asghar_nazir_at_yahoo.com
> Cc: Jeff Peng <jeff_at_dtonenetworks.com>; squid-users_at_squid-cache.org
> Sent: Tuesday, February 10, 2009 9:52:54 AM
> Subject: Re: [squid-users] How to enable transparent proxy (squid-3.0.STABLE13)
>
> M. Asghar Nazir wrote:
>> Dear Jeff!
>>
>> Thanks for your quick reply. Actually I have only work on squid 2.5 version and after a very long time now I need to rebuilt proxy in my new company using new version squid 3.0.
>>
>> could you please help me with a live Config Examples of squid 3.0 transparent proxy version.
>>
>> Rgd,
>>
>
> Three things:
>
> 1) please don't hijack discussions. They can lead to confusion such as Jeff's assumption that you were still talking about tproxy.
>
>
> 2) Are you trying to setup a website accelerator proxy (reverse proxy) or a traffic intercepting proxy?
>
> Both of your emails to date contradict each other.
>
> The httpd_accel_* are old 2.5 config for accelerators. Replaced with any of the setups listed under "Reverse Proxy" at:
> http://wiki.squid-cache.org/ConigExamples
>
> Transparent proxy is a single broad term used for several other very different types of setup.
>
> Please clarify what you need.
>
> 3)
> The ConfigExamples wiki pages details how to setup their config. In most cases they are live configs used by people somewhere on the web.
>
> Amos
>
>>
>> --- On Tue, 2/10/09, Jeff Peng <jeff_at_dtonenetworks.com> wrote:
>>
>>> From: Jeff Peng <jeff_at_dtonenetworks.com>
>>> Subject: Re: [squid-users] How to enable transparent proxy (squid-3.0.STABLE13)
>>> To: asghar_nazir_at_yahoo.com
>>> Cc: squid-users_at_squid-cache.org
>>> Date: Tuesday, February 10, 2009, 9:01 AM
>>> 2009/2/10 M. Asghar Nazir <asghar_nazir_at_yahoo.com>:
>>>> Dear All,
>>>>
>>>> I am want to configure squid as a transparent proxy
>>> using squid-3.0.STABLE13
>>>> version. I have compile squid with following
>>> parameters written below.
>>>> /configure --enable-delay-pools --enable-snmp
>>> --enable-arp-acl
>>> --enable-default-err-language="English"
>>> --enable-default-err-language="English"
>>> --enable-linux-netfilter --disable-ident-lookups
>>> --with-filedescriptors=51200
>>>> when I open /usr/local/squid/etc/squid.conf
>>>>
>>>> I didn't find these options their to enable
>>> transperent proxy.
>>>> httpd_accel_host
>>>> httpd_accel_port
>>>> httpd_accel_with_proxy
>>>> httpd_accel_uses_host_header
>>>>
>>> This is the very old directives in Squid-2.5 version.
>>> You could check the new configure directives in
>>> squid.conf.default or
>>> configure samples on:
>>>
>>> http://wiki.squid-cache.org/ConfigExamples/
>>>
>>> -- Jeff Peng
>>> Office: +86-20-38350822
>>> AIM: jeffpang
>>> www.dtonenetworks.com
>>
>>
>
>
> -- Please be using
> Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
> Current Beta Squid 3.1.0.5
>
>
>
>
>

-- 
Please be using
   Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
   Current Beta Squid 3.1.0.5