Re: [squid-users] Can someone help me block samba users at a particular time.

> Amos,
>
> I was not there when squid was compiled on the server, I am not able
> to find the configure file for squid.

"squid -v" will list the configure options squid was built with.

> So, will removing squid and reinstalling work?

It will. Though the removal should not be necessary.
Simply re-building the source with the same location options and finishing
with a "make install" should work. You need to be careful about using the
same configure options for folder and file locations though.

Amos

>
> Regards,
> Avinash
>
>
> On Fri, Oct 10, 2008 at 2:35 PM, Amos Jeffries <squid3_at_treenet.co.nz>
> wrote:
>> Avinash Rao wrote:
>>>
>>> Yes, I built squid myself. i downloaded the files from the squid site
>>> and installed it.
>>>
>>> Are you asking me rebuild squid using these options --enable-auth
>>> --enable-{auth type}-auth-helpers={helper names}
>>>
>>> Ok, let me try this and get back if necessary.
>>
>> Check the ones you have already. You may not need a full rebuild.
>> If the helper you want to use and its auth type are missing then yes you
>> will have to add hem and rebuild.
>>
>> Amos
>>
>>>
>>>
>>> Thanks so much for your time.
>>> Avinash
>>>
>>>
>>>
>>>
>>> On Wed, Oct 8, 2008 at 4:18 PM, Amos Jeffries <squid3_at_treenet.co.nz>
>>> wrote:
>>>>
>>>> Avinash Rao wrote:
>>>>>
>>>>> I went through the documentation. I need help in installing the
>>>>> auth_proxy
>>>>> module. I didn't install squid from Synaptic Manager, i did it
>>>>> manually!
>>>>> so,
>>>>> the helpers directory is missing on my system and i am not able to
>>>>> find
>>>>> the
>>>>> squid authenticators.
>>>>>
>>>>> Is there anyway i can get this?
>>>>>
>>>> You built squid yourself?
>>>>
>>>> Add some configure options to build the helpers and squid auth
>>>> components:
>>>>
>>>> --enable-auth
>>>> --enable-{auth type}-auth-helpers={helper names}
>>>>
>>>> and rebuild.
>>>>
>>>> ./configure --help shows the options and how to find out whats
>>>> available.
>>>>
>>>> Amos
>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Oct 2, 2008 at 10:24 AM, Avinash Rao <avinash.aol_at_gmail.com
>>>>> <mailto:avinash.aol_at_gmail.com>> wrote:
>>>>>
>>>>> thanks and i will check it today.
>>>>>
>>>>> On Thu, Oct 2, 2008 at 9:09 AM, Amos Jeffries <squid3_at_treenet.co.nz
>>>>> <mailto:squid3_at_treenet.co.nz>> wrote:
>>>>> >
>>>>> > > Amos,
>>>>> > >
>>>>> > > Thank you for the information. I will go through the doc, test
>>>>> it and get
>>>>> > > back if necessary.
>>>>> > > If i wrote my requirement right in my last email, the samba
>>>>> users can get
>>>>> > > access to internet only between 18:00 - 20:00 Hrs everyday.
>>>>> >
>>>>> > Ah, sorry. you wrote it right. I read it wrong.
>>>>> >
>>>>> > The http_access line should be:
>>>>> > http_access deny !deadHours sambaUsers
>>>>> >
>>>>> > and the name makes better sense being okayHours instead of
>>>>> deadHours.
>>>>> >
>>>>> > Amos
>>>>> >
>>>>> > >
>>>>> > > Thanks again
>>>>> > > Avinash
>>>>> > >
>>>>> > > On Thu, Oct 2, 2008 at 7:42 AM, Amos Jeffries
>>>>> <squid3_at_treenet.co.nz <mailto:squid3_at_treenet.co.nz>>
>>>>> > > wrote:
>>>>> > >
>>>>> > >> > Hi all,
>>>>> > >> >
>>>>> > >> > I have configured the latest version of squid on Ubuntu
>>>>> Studio 8.0 -
>>>>> > >> > AMD 64bit. I have also configured samba.
>>>>> > >> > I am in need of blocking the samba users from accessing the
>>>>> internet
>>>>> > >> > anytime except 18:00 - 20:00 Hrs everyday. How do i do
>>>>> this?
>>>>> > >> > The samba is configured as a PDC with WinXP clients.
>>>>> > >> >
>>>>> > >>
>>>>> > >> Standard samba config.
>>>>> > >> http://wiki.squid-cache.org/SquidFaq/ProxyAuthentication
>>>>> > >>
>>>>> > >> Then this at the appropriate place of your config:
>>>>> > >>
>>>>> > >> acl sambaUsers proxy_auth REQUIRED
>>>>> > >> acl deadHours time 18:00-20:00
>>>>> > >> http_access deny deadHours sambaUsers
>>>>> > >>
>>>>> > >>
>>>>> > >> Amos
>>>>> > >>
>>>>> > >>
>>>>> > >
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>
>>>> --
>>>> Please use Squid 2.7.STABLE4 or 3.0.STABLE9
>>>>
>>
>>
>> --
>> Please use Squid 2.7.STABLE4 or 3.0.STABLE9
>>
>
Received on Tue Oct 14 2008 - 02:02:00 MDT