Hi Amos
Many thanks for your quick reply. The new server is a direct replacement
for the old server and it has exactly the same hostname and IP address. I
have also checked forward and reverse DNS. I can see where you are coming
from though.
One last point, the sites work fine internally, but not externally and I
also have another domain setup and forwarding to a different internal IP and
it does the same. The odd bit about it all is the site will come
eventually - if you have enough patience. As far as I can see there are no
errors in the log files on either server
Kind regards
Gordon
----- Original Message -----
From: "Amos Jeffries" <squid3@treenet.co.nz>
To: "Gordon McKee" <squidmlist@gdmckee.com>
Cc: <squid-users@squid-cache.org>
Sent: Sunday, May 04, 2008 2:38 PM
Subject: Re: [squid-users] Very Slow Reverse Proxy
> Gordon McKee wrote:
>> Hi
>>
>> Been using squid for a long time on FreeBSD 6 STABLE(i386) and have
>> rebult the box to FreeBSD 7 STABLE (amd64) and everything appeared to
>> work untill I tried accessing websites externally hosted here.
>>
>> I am using the same version of squid2.6-stable19 and the same confg files
>> copies off the old server to the new server.
>>
>> AFAIK all the dns setting are corrct and everything resolves as it should
>> (config copied off old server.
>>
>> You can look to see what happend on a site hosted here -
>> htttp://www.birminghamcitadel.org.uk/index.htm.
>>
>> I have also plugged the old server in and everything works as it used
>> to!! I have also tried the GENERIC kernel to see if that would fix the
>> issues. All the other services the box hosts work correctly and outbound
>> websurking is fine. It is just inbound that is very very slow.
>>
>> Does anyone have any ideas?
>
> Exactly the same config file might be a problem, if the config refers to
> local-specific items such as the local hostname and local-IP.
>
> If acceleration was not setup properly for 2.6+ in the first place it may
> work with a certain rDNS but not with a similar but not quite identical
> one.
>
> Check your config file carefully to see if you can find the issue then
> post it here (minus the comments and empty lines) if you still need our
> help.
>
> Amos
> --
> Please use Squid 2.6.STABLE20 or 3.0.STABLE5
>
Received on Sun May 04 2008 - 13:51:24 MDT
This archive was generated by hypermail 2.2.0 : Tue May 13 2008 - 12:00:02 MDT