[squid-users] ntlm_auth seems to have losts it mind

Ok here is my issue, I have compiled and installed the latest stable version of squid and samba, and all seemed well until I tried the following command and got the following output.  Anyone have any idea why this is not working like it used to, on my other box it will give the prompt where I can enter my username and password and it returns ok.  Wbinfo -u and -g will populate the user and group info so I am pretty sure that is setup correctly, I just seem to be missing something here .

Thanks
Jeremy

debian:/usr/local/squid/libexec# ./ntlm_auth  --helper-protocol=squid-2.5-basic
./ntlm_auth: invalid option -- -
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- h
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- e
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
unknown option: -l. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- p
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- e
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- r
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- -
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- p
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- r
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- o
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- t
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- o
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- c
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- o
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
unknown option: -l. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- =
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- s
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- q
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- u
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- i
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- -
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- 2
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- .
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- 5
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- -
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- a
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- s
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- i
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
./ntlm_auth: invalid option -- c
unknown option: -?. Exiting
./ntlm_auth usage:
./ntlm_auth [-b] [-f] [-d] [-l] domain\controller [domain\controller ...]
-b enables load-balancing among controllers
-f enables failover among controllers (DEPRECATED and always active)
-l changes behavior on domain controller failyures to last-ditch.
-d enables debugging statements if DEBUG was defined at build-time.

You MUST specify at least one Domain Controller.
You can use either \ or / as separator between the domain name
and the controller name
debian:/usr/local/squid/libexec#
Received on Tue Mar 18 2008 - 21:05:32 MDT