Re: [squid-users] Problem with Sibling

Shekhar Gupta wrote:
> All,
>
> I have configured 4 proxy to work as sibling relation and specified
> the ICP port as 3130 , however when i try to do a telnet it always
> fails , so i think the cache performance is not getting optimized .
> Any clue for this ?????
>

Hi Shekhar,

If your telnet to your sibling proxies on port 3128 fails, then your
cache peering is not working and could possibly be setup incorrectly.

Or some firewall on the other proxies might be blocking your cache
peering. Are all the proxies on the same subnet? Are you getting errors
regarding your siblings in your cache.log too?

The best way to trouble-shoot your problem is using tcpdump. Check and
see if traffic is flowing in both directions between your sibling caches
on ports 3128 and 3130.

Thanking you...

>
> Regards,
> Shekhar
>
>
>

-- 
With best regards and good wishes,
Yours sincerely,
Tek Bahadur Limbu
(TAG/TDG Group)
Jwl Systems Department
Worldlink Communications Pvt. Ltd.
Jawalakhel, Nepal
http://www.wlink.com.np