Re: [squid-users] WCCP Module for WCCP Version 2

Martin,

I run command: "iptunnel add gre1 remote <my.router.ip.addr> local
<my.squid.ip.addr> dev eth0" (without quotes)

Then I got message below

ioctl: No such device

Would you tell me why I got it?

Thx & Rgds,

Awie

----- Original Message -----
From: "Awie" <awie@computer.org>
To: <martin.kobele@netsweeper.com>
Cc: "Henrik Nordstrom" <henrik@henriknordstrom.net>;
<squid-users@squid-cache.org>
Sent: Thursday, March 15, 2007 14:22
Subject: Re: [squid-users] WCCP Module for WCCP Version 2

> > All I do is this:
> >
> > modprobe ip_wccp
> > iptunnel add gre1 remote <RouterIP> local <LocalIP> dev eth0
> > ifconfig gre1 127.0.0.2 up
> >
> > I do not load ip_gre.
>
>
> Thanks for your suggestion Martin...
>
> The lines of :
>
> [ iptunnel add gre1 remote <RouterIP> local <LocalIP> dev eth0 ]
> [ ifconfig gre1 127.0.0.2 up ]
>
> are something that I should try.
>
> Thanks.
>
> Awie
>
> >
> > On Wednesday 14 March 2007 10:44, Awie wrote:
> > > tis 2007-03-13 klockan 14:18 -0400 skrev Martin Kobele:
> > > > Hi,
> > > >
> > > > yes, we use wccp 1.7 as well.
> > > > Do you have your GRE tunnel set up?
> > >
> > > You can't mix ip_wccp and ip_gre. The kernel can only support one GRE
> > > implementation at a time. If you load both only one will be used
> > > (probably the last loaded, but I am not sure).
> > >
> > >
> > > <AW> Yes, it is correct.
> > >
> > > <AW> I will check the WCCP handshake in Linux or Cisco.
> > >
> > > Thx & Rgds,
> > >
> > > Awie
> >
> > --
> > Martin Kobele
> > Software Developer
> > t. 519-826-5222 ext #224
> > f. 519-826-5228
> > martin.kobele@netsweeper.com
> > Netsweeper Corporate Head Office
> > 104 Dawson Road
> > Guelph, Ontario
> > N1H 1A7
> >
Received on Thu Mar 15 2007 - 01:41:13 MDT