Re: [squid-users] WCCP issue

Hi Bryan,

Thanks for your suggestion. I will do your suggest but I want to make sure
before I do the job. Please correct me.

1. I will compile new version of Squid (ie. 2.6S9) with "--enable-wccpv2"
option
2. Change the squid.conf to match the setting parameter of new Squid version
3. Change the Cisco Router WCCP from version 1 to version 2.
4. Keep the current Linux kernel 2.4.34 that support WCCPv2
5. Keep the current ip_wccp.o (version 1.7) that already support WCCPv2

Please advise

Thx & Rgds,

Awie

----- Original Message -----
From: "Bryan Shoebottom" <bshoebottom@fanshawec.ca>
To: "Awie" <awie@nangura.net>
Cc: "Squid-users" <squid-users@squid-cache.org>
Sent: Friday, February 02, 2007 21:33
Subject: Re: [squid-users] WCCP issue

> Awie,
>
> I had a similar problem with only a couple sites, specifically mail ones
> like hotmail, gmail, etc. I found a lot of documentation to work with
> the redirect rule in the firewall on the squid server but this didn't
> make a difference. I finally compiled in WCCPv2 support (into the 2.5S
> code at the time), and all my problems went away! I am currently using
> 2.6S9 on one server and 2.6S4 on another with --enable-wccpv2 and have
> had no complaints.
> Hope this helps.
>
> --
> Thanks,
>
> Bryan Shoebottom CCNA
> Network & Systems Analyst
> Network Services & Computer Operations
> Fanshawe College
> Phone: (519) 452-4430 x4904
> Fax: (519) 453-3231
> BShoebottom@Fanshawec.ca
>
> On Fri, 2007-02-02 at 04:40 -0500, Awie wrote:
> > Dear all,
> >
> > After running for more than 1 year, our proxy cannot serve normally
> > all
> > request to hotmail.com (only, Yahoo mail is OK). Our proxy is running
> > Squid
> > 2.5S14 with WCCPv1 (WCCP module version 1.7). We tried to upgrade to
> > 2.6S9
> > but we got same result.
> >
> > If we run the proxy as non-transparent or run as transparent by using
> > "route
> > map" the request to hotmail.com can be served normally. Problem was
> > always
> > happen with WCCP.
> >
> > Would you tell me what I should do to solve the problem? I prefer to
> > use
> > WCCP instead of "route map" that consume more CPU resource and create
> > problem when our proxy dies.
> >
> > Thanks a lot for your kind help.
> >
> > Thx & Rgds,
> >
> > Awie
> >
> >
> >
> >
>
Received on Fri Feb 02 2007 - 07:25:50 MST