RE: [squid-users] WCCPv2 + Squid v2.6 Stable3

I had this problem before as I have more than one ip on the cisco router and
I write the wrong ip of the wccp router command so be sure that the ip of
wccp router is the same with the router id which is (10.100.0.21) in your
case.

Eng . Hamed Adel
Senior Network Engineer
Mail: hamedadel@egyptnetwork.com
Tel : +2 0502528897
Mob: +2 0103503888
Fax: +2 0502528897
Web site: www.egyptnetwork.com

-----Original Message-----
From: Dominique Demore [mailto:demored@rainbowschools.ca]
Sent: Wednesday, September 06, 2006 4:31 AM
To: squid-users@squid-cache.org
Subject: [squid-users] WCCPv2 + Squid v2.6 Stable3

Hi Everyone,

For the past few days, I've been having trouble getting squid to connect to
our router.
After enabling squid, when I issue the "ip wccp web-cache detail" I get the
following:
--------------
WCCP Cache-Engine information:
        Web Cache ID: 10.100.0.21
        Protocol Version: 2.0
        State: NOT Usable
        Redirection: L2
        Packet Return: L2
        Packets Redirected: 0
        Connect Time: 00:00:24
        Assignment: MASK
---------------

When I issue a debug off the router I am seeing the following:

---------------
Sep 5 21:23:22 EDT: WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad
rcv_id 00000000
Sep 5 21:23:22 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21
w/ rcv_id 00000106
Sep 5 21:23:27 EDT: WCCP-PKT:S00: Sending Removal_Query packet to
10.100.0.21w/ rcv_id 00000107
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: S00
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: deallocate rtr_view
(24 bytes)
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: allocate hash
rtr_view (1560 bytes)
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: rtr_view_size set to
24 bytes
Sep 5 21:23:32 EDT: WCCP-EVNT:S00: Built new router view: 0 routers, 0
usable web caches, change # 00000041
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: enter
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: allocate orig
hash info (40 bytes)
Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: exit
Sep 5 21:23:32 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21
w/ rcv_id 00000108
Sep 5 21:23:42 EDT: WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad
rcv_id 00000000
Sep 5 21:23:42 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21
w/ rcv_id 00000109
----------------

I am curious to why "WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad
rcv_id 00000000" is occuring.

Squid is installed on RHEL 4.0
Cisco 7606 w/SUP720 [IOS 12.2(17d)SXB1]

Anyone else experience this issue.. I have seen some message in the mailing
list, but haven't really found a solution.
Any help would be greatly appreciated.

Thanks.

-- Dominique

-----
Dominique Démoré
Technical Services Coordinator
Rainbow District School Board
69 Young Street
Sudbury, Ontario
P3E 3G5
Tel: (705) 674-3171 x. 258
Fax: (705) 671-2442
Received on Mon Sep 11 2006 - 03:49:42 MDT