Re: [squid-users] comm_call_handlers(): WARNING ... error msgs with squid 2.6-S2

On 8/4/06, Steven Wilton <swilton@q-net.net.au> wrote:
> ----- Original Message -----
> From: "Pranav Desai" <pranavadesai@gmail.com>
> To: <squid-users@squid-cache.org>
> Sent: Saturday, August 05, 2006 7:31 AM
> Subject: [squid-users] comm_call_handlers(): WARNING ... error msgs with
> squid 2.6-S2
>
>
> > Hello,
> >
> > I am getting the following error messages with very little load (200
> > req/s) on the cache. While running polymix-4.
> >
> > squid version
> > --------------------
> > Squid Cache: Version 2.6.STABLE2
> > configure options: '--prefix=/usr/squid' '--exec-prefix=/usr/squid'
> > '--sysconfdir=/usr/squid/etc' '--enable-snmp'
> > '--enable-err-languages=English' '--enable-linux-netfilter'
> > '--enable-dlmalloc' '--enable-async-io=24' '--enable-linux-tproxy'
> > '--enable-gnuregex' '--enable-internal-dns' '--enable-epoll'
>
> It doesn't look like you've enables >1024 fd's in the configure output. You
> need to add --with-maxfd=8192 (or some other number) to allow squid to use
> more than 1024 fd's. the place to check this is by going to the "General
> Runtime Information" menu in cachemgr. The maximum number of fd's that
> squid will use is near the botoom of the page.

That seems to have done the trick.

Thanks a lot.

-- Pranav

>
> Steven
>
>

-- 
------------------------------
http://pd.dnsalias.org