Elsen Marc wrote:
> 
>
>  
>
>>right, cache partition size is 15gb  and we have created ....
>>
>>cache_dir diskd /cache2/cache1 7500
>>cache_dir diskd /cache2/cache2 7500
>>
>>
>>Is this fine? or we have to leave some space on cache2 partition , 
>>currently 7500 + 7500 = 15000 all the partition space
>>what is the good partice?
>>
>>    
>>
> 
> I would advise to only specify one cachedir per partition, it does not make
> much sense to define two, in performance terms (e.g).
> Then make it somewhat smaller as the available partition size
> and  you will be fine as in :
>
>  cache_dir diskd /cache2/total_cache 13000
>
> Note  that squid by itself will keep some free space
> within the specified cache dir.
> These values are controlled by :
>
>     cache_swap_low
>and 
>    cache_swap_high
>
> settings; check squid.conf.default (comments), for further explanations.
>
>    M.
>  
>
alright I got the point atm what i did is to decrease the cache_dir size 
and restart the squid. However now im thinking about to create a single 
cache directory on a single partition but duno howto do this, im pasting 
the output of df and cache_dir lines from squid.conf hopes someone from 
list suggest a smooth way out to single cache directory per partition.
#df -lh
/dev/sda2              16G   15G  991M  94% /cache1
/dev/sda6              15G   14G 1015M  94% /cache2
/dev/sdb1              16G   15G  1.5G  91% /cache3
/dev/sdb3              16G   15G  1.8G  89% /cache4
#vi /usr/local/squid/etc/squid.conf
cache_dir diskd /cache1/cache1 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache1/cache2 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache2/cache1 7000 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache2/cache2 7000 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache3/cache1 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache3/cache2 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache4/cache1 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
cache_dir diskd /cache4/cache2 7500 32 512 Q1=72 Q2=66 Q1=72 Q2=64
store_dir_select_algorithm round-robin
1) To create a single cache direcotry / partition (as you suggested)
3) would i have to loose my stored cache?
2) Is this beneficial to use "Q1=72 Q2=66 Q1=72 Q2=64" things with diskd ?
Thanks and regards
Received on Tue Feb 01 2005 - 03:46:27 MST
This archive was generated by hypermail pre-2.1.9 : Tue Mar 01 2005 - 12:00:01 MST