Hi
I need help configuring squid with WCCP support with my Cisco 2600 router with IOS version
12.3(6c). It doesn't look like the router know the ip address of the squid box (the web-cache
ID is 0.0.0.0 from "ip wccp web-cache detail"), though it knows that there is a web cache
engine in the network. The following are from my router
Router#show ip wccp
Global WCCP information:
Router information:
Router Identifier: x.x.x.x
Protocol Version: 1.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 678260
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 140
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Router#show ip wccp web-cache detail
WCCP Cache-Engine information:
Web Cache ID: 0.0.0.0
Protocol Version: 0.4
State: Usable
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 10564
Connect Time: 00:01:36
and the following are snippet from debug ip wccp event and debug ip wccp packets
Nov 16 01:59:43.735 UTC: WCCP-PKT: Received valid Here_I_Am packet from y.y.y.y w/rcvd_id
0000158D
Nov 16 01:59:43.735 UTC: WCCP-PKT: Sending I_See_You packet to y.y.y.y w/ rcvd_id 0000158E
(where y.y.y.y is my squid ip and x.x.x.x is my public interface of the router)
Any suggestions or pointing to some reading would be very appreciate.
Det Buaklee
Received on Mon Nov 15 2004 - 19:15:11 MST
This archive was generated by hypermail pre-2.1.9 : Wed Dec 01 2004 - 12:00:01 MST