List,
I am currently having a Cisco router (with IOS 12.X) with WCCP2 configured
on the same & a CISCO cache engine. The router has support for WCCP 1 &
WCCP2 both.
I want to replace this Cisco cache engine with Squid cache. I am using
RedHat 9.0 with squid-2.5.STABLE. By setting WCCP1 on the router side
router is able to discover the squid cache.
I have verified from router's DEBUG log that my Squid is senging sending
HERE_I_AM packets to the router. Router is sending Sending I_See_You packet
to squid.
On squid Linux box I have used the iptables command to make your kernel
intercept HTTP connections and send them to Squid:
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT
--to-port 3128
echo 1 > /proc/sys/net/ipv4/ip_forward
My problem is that I am not able to browse any site one the router starts
diverting all HTTP request to squid box. If I set squid proxy in the
client's browser then it works that means my squid is able to serve the
request. But setting proxy on client's browser is not I want. I want it to
run in transparent mode. I have used
http://www.swelltech.com/support/usersguide/ch10.html to setup this .
Quick response is appreciated.
Regards,
Milind
Received on Mon Nov 01 2004 - 20:03:39 MST
This archive was generated by hypermail pre-2.1.9 : Wed Dec 01 2004 - 12:00:01 MST