But there is only 1 internet connection in Network A ..(172.16.1.0) ..
peoples in Network B should request to Network A if they want to surf to
internet .. I want squid in Network B will handle it before they passed to
Network A .. then I only set the acl for the squid for Network B.. I need
advice .. thanks
----- Original Message -----
From: "Henrik Nordstrom" <hno@squid-cache.org>
To: "Muthukumar" <kmuthu_gct@hotmail.com>
Cc: "Henrik Nordstrom" <hno@squid-cache.org>; "Winanjaya"
<winan888@cbn.net.id>; <squid-users@squid-cache.org>
Sent: Wednesday, February 25, 2004 8:30 PM
Subject: Re: [squid-users] 2 squid server in different network (Urgent)
> On Wed, 25 Feb 2004, Muthukumar wrote:
>
> > If the squid is going to handle ip-addresses which are in the particular
> > network (172.16.1.0).And it is not going to handle other requests means,
> > then what is the difference between
> >
> > 0.0.0.0/0 and 172.16.1.0/255.255.255.0
>
> The difference is that the "all" ACL is assumed to always be true by
> the default setting of several of the squid.conf directives.
>
> Many of these directives have a default of "deny all", and if you redefine
> "all" to something else this becomes "allow all except your own users".
> Most notably this makes a significant difference in the icp_access and
> snmp_access directives.
>
> It is also very important for the default recommendation of ending your
> http_access rule with a
>
> http_access deny all
>
> to deny all other accesses to the proxy. If you redefine the "all" acl
> this makes the above mean the complete opposite, allowing everyone else
> access to use the proxy which quickly leads to disaster.
>
> Regards
> Henrik
>
Received on Wed Feb 25 2004 - 19:15:45 MST
This archive was generated by hypermail pre-2.1.9 : Mon Mar 01 2004 - 12:00:03 MST