RE: [squid-users] Squid + MSAD.

Hi Henrik,
                I have been same test with squid_ldap_auth and
squid_ldap_group. And I see that same part of squid_ldap_group line work
properly (part that connect to LDAP and do the search), but I belive that
when squid_ldap_group must send user and password there is same wrong,
because take password as group.

Is the filter syntax correct?

...if not ... How can I do to send correct user and password?

[localhost]#./squid_ldap_group -b "dc=ar,dc=McDcorp" -D "cn=test
user,ou=Varios,ou=EDS,ou=UsuariosyGrupos,ou=Arcos Dorados,dc=ar,dc=McDcorp"
-w "password" -f
"(&(cn=%g)(member=cn=%u,cn=Squid,ou=Grupos,ou=Comunes,ou=UsuariosyGrupos,ou=
Arcos Dorados,dc=ar,dc=McDcorp))" -h 207.169.88.202 -p 389 -d
ar-username password
Connected OK
filter
(&(cn=password)(member=cn=ar-username,cn=Squid,ou=Grupos,ou=Comunes,ou=Usuar
iosyGrupos,ou=Arcos Dorados,dc=ar,dc=McDcorp))
ERR

Thanks in Advance.

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: Tuesday, February 17, 2004 19:31
To: Ampugnani, Fernando
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] Squid + MSAD.

On Tue, 17 Feb 2004, Ampugnani, Fernando wrote:

> I want validate squid via squid_ldap_auth but don´t work.

See the MSAD examples in the squid_ldap_auth manual for some information
as to what is required to set up the connection.

Regards
Henrik
Received on Thu Feb 19 2004 - 06:01:01 MST