Re: [squid-users] cisco wccp problem

Damian-Grint Philip wrote:
> Do you have something like:
> httpd_accel_host virtual
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
> In your squid.conf?
>

yes, I have all these set up
I also have httpd_accel_port 80

anyway, transparent proxy is working on this host, for the traffic that
simply passes through

[LAN1] --- [ PIX (NAT) ] ---[ROUTER]---[INTERNET]
                                             |
                                             |
[LAN2]----[CACHE (NAT) ]--/

LAN2 gets transparently redirected
LAN1 need to be redirected on the router, and wccp is the best way to do it

> Also if you are using the ip_wccp module you shouldn't use the ip_gre module
> or set up an explicit gre tunnel
>

i set up the tunnel this way:
ip tunnel add cisco mode gre remote 212.244.a.b local 212.244.a.c ttl 255
ip link set cisco up
ip addr add 192.168.45.2 dev cisco
ip route add 192.168.45.0/24 dev cisco

it doesn't work if ip_gre is not loaded, even though ip_wccp is
I get : ioctl: No such device at the ip tunnel add .....

what do you mean by, "set up an explicit gre tunnel" ?

Kuba
Received on Thu Aug 28 2003 - 02:55:32 MDT