Hi,
I read all the tutorials, and went through all the mailing list
archives, but still cannot make it work
I have a gre tunnel up.
The router can see the cache and they exchange here_i_am/i_see_you packets.
Aug 27 16:49:49: WCCP-PKT: Received valid Here_I_Am packet from
192.168.45.2 w/rcvd_id 00000194
Aug 27 16:49:49: WCCP-PKT: Sending I_See_You packet to 192.168.45.2 w/
rcvd_id 00000195
Aug 27 16:49:59: WCCP-PKT: Received valid Here_I_Am packet from
192.168.45.2 w/rcvd_id 00000195
Aug 27 16:49:59: WCCP-PKT: Sending I_See_You packet to 192.168.45.2 w/
rcvd_id 00000196
Problem is that cisco doesn't redirect any http traffic to squid.
router config contains:
ip wccp version 1
ip wccp web-cache
ip wccp web-cache redirect in, on inside fast-ehernet interface
Squid config contains:
wccp_router 192.168.45.1
wccp_version 3
I have ip_wccp module loaded:
ip_wccp 1784 0 (unused)
The full output from sh ip wccp web-cache is:
Global WCCP information:
Router information:
Router Identifier: 192.168.251.5
Protocol Version: 1.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 2707
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
I don't use any redirect acl's. I want all the traffic redirected.
On the mailing list I found that people had the same problem, but I
can't find any solution to it.
If someone give me a hint , what I am doing wrong.
I know people have this configuration running, so please help :-)
regards
Kuba
Received on Wed Aug 27 2003 - 09:01:42 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:19:09 MST