Re: [squid-users] Re: Squid VS WFQ

I think you can only use one IP address for tcp_outgoing_address.
What would be the sense to used round robin for outgoing connections?

-aj

----- Original Message -----
From: "babar " <babar@insta.net.pk>
To: <babar@insta.net.pk>; "Alexandre" <asaugusto@fazenda.sp.gov.br>; "Henrik
Nordstrom" <hno@marasystems.com>
Cc: <squid-users@squid-cache.org>
Sent: Wednesday, June 05, 2002 09:40
Subject: [squid-users] Re: Squid VS WFQ

> What i want is every outgoing request from my machine should have a
diffrent IP address. lets say i assign the squid machine with 100 diffrent
IP and squid could round robin between these IPs.
>
> bregds,
> Babar
>
> ---------- Original Message ----------------------------------
> From: Henrik Nordstrom <hno@marasystems.com>
> Date: Wed, 5 Jun 2002 08:34:29 +0200
>
> >You can distribute your clients on multipe IP addresses using
> >Squid-2.5.
> >
> >Regards
> >Henrik
> >
> >On Wednesday 05 June 2002 09:06, babar wrote:
> >> Problem: I have noticed that the users who use the squid proxy are
> >> getting a slower response then the users not using a proxy. I
> >> problem is with my ISP they are using a WFQ queing on there router
> >> which drops the IPS creating the most traffic. so the squid IP
> >> address is most likely to be droped.
> >>
> >> http://www.cisco.com/warp/public/732/Tech/wfq/
> >>
> >> Solution: If i could send request from squid with multiple IP
> >> addresses.
> >
> >
>
Received on Wed Jun 05 2002 - 06:49:07 MDT