Hi Everyone, 
Just quick question :
Here is the output from my SARG (Generates Reports based on squid's
access.log) :
N  USERID   CONNECT  BYTES      %BYTES IN-CACHE-OUT   USED    TIME
MILISEC %TIME 
 
1  xxxxx   4.461   91.952.887 25.70% 0.97%   99.03% 02:26:34 8.794.584
4.73% 
2  xxxxx   14.461  78.528.441 21.95% 12.10%  87.90% 05:05:13 18.313.500
9.85% 
3  everybody 40.809  58.677.302 16.40% 100.00% 0.00%  00:01:32 92.982
0.05% 
4  xxxxx   13.761  50.776.843 14.19% 41.76%  58.24% 03:51:22 13.882.368
7.47% 
5  xxxxx   11.592  28.490.155 7.96%  9.95%   90.05% 03:18:22 11.902.943
6.40% 
6  xxxxx   5.199   16.916.589 4.73%  9.20%   90.80% 00:43:34 2.614.478
1.41% 
7  xxxxx   4.251   14.389.871 4.02%  15.27%  84.73% 34:50:20 125.420.989
67.48% 
8  xxxxx   2.514   9.346.915  2.61%  8.16%   91.84% 00:47:05 2.825.545
1.52% 
9  xxxxx   1.725   6.939.035  1.94%  19.10%  80.90% 00:28:15 1.695.873
0.91% 
10  xxxxx   339     1.377.460  0.38%  40.95%  59.05% 00:04:46 286.314
0.15% 
11  xxxxx   124     391.717    0.11%  66.21%  33.79% 00:00:48 48.095
0.03% 
when you click on "everybody", you get :
  
 ACCESSED SITE CONNECT BYTES %BYTES IN-CACHE-OUT USED TIME MILISEC %TIME
   <http://www.apec.acer.com.au:443> www.apec.acer.com.au:443 5.958
8.144.586 13.88% 100.00% 0.00% 00:00:08 8.623 9.27% DENIED 
 ng.ingrammicro.com 1.990 3.363.888 5.73% 100.00% 0.00% 00:00:03 3.178
3.42% DENIED 
 au.ingrammicro.com 1.586 2.323.572 3.96% 100.00% 0.00% 00:00:02 2.670
2.87% DENIED 
 ad-adex3.flycast.com 1.338 2.102.886 3.58% 100.00% 0.00% 00:00:01 1.305
1.40% DENIED 
   <http://www.ezula.com> www.ezula.com 1.077 1.498.107 2.55% 100.00%
0.00% 00:00:00 706 0.76% DENIED 
   <http://www.enterprise.cwo.com.au:443> www.enterprise.cwo.com.au:443
1.000 1.382.000 2.36% 100.00% 0.00% 00:00:01 1.165 1.25% DENIED 
 techpac.com.au 741 1.068.080 1.82% 100.00% 0.00% 00:00:02 2.195 2.36%
DENIED 
   <http://www.realestate.com.au> www.realestate.com.au 563 821.302
1.40% 100.00% 0.00% 00:00:01 1.781 1.92% DENIED 
 d2.webhancer.com 546 746.382 1.27% 100.00% 0.00% 00:00:00 321 0.35%
DENIED 
 d1.webhancer.com 546 746.382 1.27% 100.00% 0.00% 00:00:00 332 0.36%
DENIED 
<blah blah>
I am running NTLM authentication.  
Now the "everybody" list obviously contains no user and therefore all
the DENIED cache accesses.
Now according to the main list I have 57,667,000 bytes which have gone
into the cache but not out. Does this mean that even though the user
failed authentication, the proxy still went out and got the data even
though it didnt pass it to the user?
Thanks in advance for your help..
Michael.
--- 
Regards, 
----------------------------------------------------------------------- 
Michael Cheshire 
Network Engineer 
Microarts Pty Ltd 
mailto:michael.cheshire@microarts.com.au
<mailto:michael.cheshire@microarts.com.au>  
http://www.microarts.com.au <http://www.microarts.com.au/>  
PH : 8373 7000 / 0402 277 092 
----------------------------------------------------------------------- 
Disclaimer: 
Confidentiality 
This  message  contains  privileged  and/or  confidential  information 
intended only for the use of the addressee named above. If you are not 
the  intended recipient of  this message you are  hereby notified that 
you must  not  disseminate,  re-transmit, copy  or take any  action in 
reliance  on it. If you have  received this message  in  error  please 
delete  the document  and  notify  Microarts  immediately.  Any  views 
expressed in this  message are those of the individual sender,  except 
where the sender specifically states them to be the views of Microarts. 
Viruses 
Any  loss/damage incurred by using  this material is not  the sender's 
responsibility.   Microarts  entire   liability  will  be  limited  to 
re-supplying  the material.  No warranty is made that this material is 
free from computer virus or any other defect. 
----------------------------------------------------------------------- 
 
Received on Sun Nov 25 2001 - 23:28:47 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:04:30 MST