[squid-users] Re: working with wccp

From: patel pankaj <pankaj_surat@dont-contact.us>
Date: Mon, 8 Oct 2001 00:57:02 -0700

('binary' encoding is not supported, stored as-is) You can do a netstat -ant it will show you connection between squid and router on prot 2048.
On router u can execute show ip wccp web-cache details.

:)> router2>sh ip wccp
:)> :)> Global WCCP information:
:)> :)> Router information:
:)> :)> Router Identifier: 192.168.1.1
:)> :)> Protocol Version: 1.0
:)> :)>
:)> :)> Service Identifier: web-cache
:)> :)> Number of Cache Engines: 1
:)> :)> Number of routers: 1
:)> :)> Total Packets Redirected: 6240
:)> :)> Redirect access-list: -none-
:)> :)> Total Packets Denied Redirect: 0
:)> :)> Total Packets Unassigned: 0
:)> :)> Group access-list: -none-
:)> :)> Total Messages Denied to Group: 0
:)> :)> Total Authentication failures: 0
:)> :)>
:)> :)> ----------------
:)> :)> router2>sh ip wccp we detail
:)> :)> WCCP Cache-Engine information:
:)> :)> IP Address: 192.168.1.5
:)> :)> Protocol Version: 0.4
:)> :)> State: Usable
:)> :)> Initial Hash Info: 0000000000000000000000000000000
:)> :)> 0000000000000000000000000000000
:)> :)> Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
:)> :)> FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
:)> :)> Hash Allotment: 256 (100.00%)
:)> :)> Packets Redirected: 6240
:)> :)> Connect Time: 01:27:31
:)> :)>

In squid.conf define wccp_version and wccp_router .

Thanks
pankaj

>Date: Thu, 04 Oct 2001 09:36:28 +0200
> Henrik Nordstrom <hno@marasystems.com> Babe Meneses Beltran <bmeneses_beltran@hotmail.com>CC: squid-users@squid-cache.org
> [squid-users] Re: working with wccp
>Babe Meneses Beltran wrote:
>>
>> Hi, Now with new kernel Imade modprobe ip_wccp and not send error, too
>> execute depmod -a -e and send error, I believe that this is fine.
>
>Good.
>
>> OK, I configured the squid.conf and Y made the changes such as:
>>
>> http_port 8080
>> httpd_accel_host virtual
>> httpd_accel_port 80
>> httpd_accel_with_proxy on
>> httpd_accel_uses_host_header on
>
>Good, but I also believe you have to tell Squid to announce itself to
>the router.
>
>See the wccp_* directives in squid.conf.
>
>> ipchains -A input -p tcp -d 0/0 80 -j REDIRECT 8080
>
>Fine.
>
>> Ok, but not work, I am monitoring the access_log and I am not see access.
>
>> How Can I to make a debug between my server and the router?
>
>Sorry. I am not familiar with the operation of WCCP.
>
>Regards
>Henrik Nordstrom
>Squid Hacker

------------------------------------------------------------
Nettaxi would like to ask for your help in donations to the RED CROSS today!
http://www.nyredcross.org/donate/
Received on Mon Oct 08 2001 - 01:57:10 MDT