RE: [squid-users] squid keeps restarting with basic auth enabled

Hi!
I have read the documentation, though do not find any new elements why it
does not work.
In fact not only MSNT, but also SMB does not seem to work. I have samba
installed. On other proxies it works (without the NTLM).
On this machine and another (exactly the same machine and configuration), it
does not seem to work together with NTLM.
Any further ideas are welcome and appreciated.
Thanks!

BR/Koen

> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@marasystems.com]
> Sent: 02 October 2001 11:12
> To: Van Bossche Koen; squid-users@squid-cache.org
> Subject: Re: [squid-users] squid keeps restarting with basic auth
> enabled
>
>
> Well. I'd suggest you start by reading the msnt_auth documentation. It
> is next to the source.
>
> squid-2.4.STABLE2/auth_modules/MSNT/README.html
> or
> squid-HEAD/src/auth/basic/helpers/MSNT/README.html
>
> depending on the version used..
>
>
> I have not yet used this auth helper since I never have needed to
> integrate with a NT Domain network, but what I can tell is
> that there is
> no use trying to call it from Squid until you can successfully test it
> manually. This rule applies to all Basic auth helpers, not only
> msnt_auth.
>
> Regards
> Henrik Nordström
> Squid Hacker
> MARA Systems AB, Sweden
>
>
> Van Bossche Koen wrote:
> >
> > Well, seems I cannot test it. If I give the command
> ./msnt_auth, it just
> > immediatly gives me the command prompt again. Nothing seems
> to happen. I
> > cannot test it with my username and password.
> >
> > This is how I have configured squid :
> > ./configure --prefix=/opt/squid --sysconfdir=/etc/squid
> > --enable-xmalloc-statistics --disable-wccp --enable-delay-pools
> > --enable-snmp --disable-ident-lookups --enable-underscores
> > '--enable-auth=ntlm basic' --enable-ntlm-auth-helpers=NTLMSSP
> > '--enable-basic-auth-helpers=SMB MSNT' --enable-storeio=diskd,aufs
> > --disable-internal-dns --enable-err-language=English
> >
> > After setting up squid, I have these files at
> /opt/squid/libexec/squid/ :
> > cachemgr diskd msnt_auth ntlm_auth smb_auth
> smb_auth.sh unlinkd
> >
> > What files does msnt_auth need exactly?
> >
> > BR/Koen
> >
> > > -----Original Message-----
> > > From: Henrik Nordstrom [mailto:hno@marasystems.com]
> > > Sent: 02 October 2001 10:35
> > > To: Van Bossche Koen
> > > Cc: 'squid-users@squid-cache.org'
> > > Subject: Re: [squid-users] squid keeps restarting with basic auth
> > > enabled
> > >
> > >
> > > Have you verified the msnt_auth configuration as
> recommended in it's
> > > documentation?
> > >
> > > Regards
> > > Henrik Nordström
> > > Squid hacker
> > >
> > >
> > > Van Bossche Koen wrote:
> > > >
> > > > Hi all,
> > > >
> > > > I have installed squid-head from 26/09 and enabled it with
> > > NTLM. If I enable
> > > > basic as an alternate authentication method, squid keeps
> > > restarting every 2
> > > > minutes. My cache.log shows :
> > > > 2001/10/02 10:03:20| WARNING: basicauthenticator #3 (FD
> 28) exited
> > > > 2001/10/02 10:03:53| WARNING: basicauthenticator #4 (FD
> 29) exited
> > > >
> > > > This is my configuration :
> > > > auth_param ntlm program /opt/squid/libexec/squid/ntlm_auth
> > > DOMAIN/kcoeq01
> > > > DOMAIN/kcobe6 DOMAIN/kcobe6a
> > > > auth_param ntlm children 8
> > > > auth_param ntlm max_challenge_reuses 1
> > > > auth_param ntlm max_challenge_lifetime 2 minutes
> > > > auth_param basic program /opt/squid/libexec/squid/msnt_auth
> > > > auth_param basic children 8
> > > > auth_param basic realm Squid Europe proxy-caching web server
> > > > auth_param basic credentialsttl 2 hours
> > > >
> > > > Does anyone have some advice for me? Would be nicely
> appreciated.
> > > >
> > > > Thanks/Best Regards/Koen
> > >
>
Received on Tue Oct 02 2001 - 04:22:53 MDT