Re: [squid-users] Telnet Sessions Disconnect

This is my ipchains file which executes at the startup Do I need to add anything in to it to enable it:

/sbin/ipchains -A input -p tcp -s 192.168.1.0/24 -d 0/0 80 -j REDIRECT 8080
/sbin/ifconfig eth0:0 192.168.1.1
/sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ
/sbin/ipchains -A input -p tcp -s 192.168.1.0/24 ftp -j ACCEPT
/sbin/ipchains -A input -p tcp -s 191.168.1.0/24 ftp-data -j ACCEPT
/sbin/ipchains -A output -p tcp -s 192.168.1.0/24 ftp-data -j ACCEPT
/sbin/insmod ip_masq_ftp

Charanbeer.
  ----- Original Message -----
  From: Löger, Stefan
  To: 'Charanbeer' ; Squid
  Sent: Friday, May 25, 2001 1:07 PM
  Subject: AW: [squid-users] Telnet Sessions Disconnect

  Squid is NOT a Telnet Proxy, only Http, Ftp und SSL tunneling!!
    -----Ursprüngliche Nachricht-----
    Von: Charanbeer [mailto:charanbeer.s@net4india.net]
    Gesendet: Freitag, 25. Mai 2001 09:35
    An: Squid
    Betreff: [squid-users] Telnet Sessions Disconnect

    Hi All

    I am running Squid 2.3 on Red Hat 6.1 with the deafult squid.conf serving 40odd win95/98 clients.My squid machine is PIII 550 MHz
    with 10gb HDD and 128MB RAM (256MB of swap space) These clients use telnet a lot and their telnet sessions tend to disconnect after every few minutes whereas if they go directly(i.e. without using proxy) they dont face any such problem.

    Is there anything in squid.conf which defines the idle time after which the client's telnet session is disconnected. Any suggestions on this would be a great help.

    Thanks in advance
    Charanbeer.
Received on Fri May 25 2001 - 02:48:48 MDT