Re: [squid-users] Re: Satellite

I would almost assume it would be more efficient and easier to manage if you
have a separate squid box for dial up and a separate box for your internal
network.

Is it possible to have two installs of squid and run two separate squid
"servers" on the same box? Two separate cache directories and everything?
That way he has internal network connect to squid process1 on port 8081 and
dialup users connect to squid process2 on port 8080.

Adam Lang
Systems Engineer
Rutgers Casualty Insurance Company
http://www.rutgersinsurance.com
----- Original Message -----
From: "Edward" <edward@cariaccess.com>
To: "Jon Mansey" <jon@interpacket.net>
Cc: "squid" <squid-users@squid-cache.org>
Sent: Thursday, April 26, 2001 5:43 AM
Subject: Re: [squid-users] Re: Satellite

Hi Jon!

But this can still cause a problem.

I only need dialup client to use the SAT.

With this option, tcp_outgoing_address, everyone will use the SAT.

Thank you very much.

Best regards,

Edward Millington
(Network Administrator & Senior Technical Support Technician)
Cariaccess Communications Ltd.
Carlisle House
Hincks Street
Bridgetown
Barbados
1-246-430-7435
Fax : 1-246-431-0170
www.cariaccess.com
----- Original Message -----
From: "Jon Mansey" <jon@interpacket.net>
To: "Edward" <edward@cariaccess.com>
Cc: <squid-users@squid-cache.org>
Sent: Thursday, April 26, 2001 4:05 AM
Subject: [squid-users] Re: Satellite

> Add a satellite routed IP address to your squid box as an alias, then
> tell squid to use that IP for outbound UDP and TCP in the config file.
>
> jm
>
>
>
> >Hi Henrik!
> >
> >With squid enable using cisco route policy, the test IP which we are
using
> >will not route throught the SAT.
> >
> >Most probably, the squid is contacting the servers as a proxy with its IP
> >address.
> >
> >How can I solve this problem?
> >
> >Thank you very much.
> >
> >Best regards,
> >
> >Edward Millington
> >(Network Administrator & Senior Technical Support Technician)
> >Cariaccess Communications Ltd.
> >Bridgetown
> >Barbados
> >1-246-430-7435
> >Fax : 1-246-431-0170
> >edward@cariaccess.com
> >www.cariaccess.com
> >----- Original Message -----
> >From: "Henrik Nordstrom" <hno@hem.passagen.se>
> >To: "Edward" <edward@cariaccess.com>
> >Sent: Wednesday, April 25, 2001 5:54 PM
> >Subject: Re: Satellite
> >
> >
> >> What you have in Squid is tcp_outgoing_address. Might work four you.
> >>
> >> And please address questions to squid-users (not privately), and only
> >> one copy of the same question per week.
> >>
> >>
> >> Edward wrote:
> >> >
> >> > Hi there!
> >> >
> >> > I am running squid 2.4 Stable 1 on Redhat 7.0 Kernel 2.2.17.
> >> >
> >> > We are an ISP
> >> >
> >> > We have 2 Class C's. one for our net work and one for our dial up
> >customers.
> >> >
> >> > We want to use the 1 of those class C for Satellite routing.
> >> >
> >> > Ie. The class C for our dialup will go throught our telecom provider
and
> >> > routed back through the SAT for downloading.
> >> >
> >> > Do I have to configure squid to let the client use the bandwidht on
the
> >sat
> >> > instead of using out telecom provider bandwidth?
> >> >
> >> > In other words, squid my download throught the SAT for dialup
customers.
> >> >
> >> > Thank you very much.
> >> >
> >> > Best regards,
> >> >
> >> > Edward Millington
> >> > (Network Administrator & Senior Technical Support Technician)
> >> > Cariaccess Communications Ltd.
> >> > Carlisle House
> >> > Hincks Street
> >> > Bridgetown
> >> > Barbados
> >> > 1-246-430-7435
> >> > Fax : 1-246-431-0170
> >> > www.cariaccess.com
> >>
>
>
Received on Thu Apr 26 2001 - 07:17:27 MDT