RE: [SQU] How to install NTLM Authentication.

Hi Craig

No, I don't know what it does, but after I have started it, it comes back
with the command prompt.
So i suppose it worked :)
The second line seems to download te latest development source of squid.

Did U get another version up and running yet?
What do you need, like me just the fakeauth to get a username, or do u need
authentication?

after some little adjustments smb_auth runs fine over here, but we're not
using it.

-----Oorspronkelijk bericht-----
Van: Craig Fels [mailto:csfels@swbell.net]
Verzonden: Tuesday, October 24, 2000 3:55 PM
Aan: Yuri Sytema
Onderwerp: Re: [SQU] How to install NTLM Authentication.

Yuri,

I'm also trying to install NTLM for squid. I"m following the steps you
listed below and have a question. When you type the first cvs line to log
on you press enter at the password prompt. Now what? Do I wait for some
confirmation that I was logged on, or do I continue typing the next line?

Thanks
Craig
----- Original Message -----
From: "Yuri Sytema" <Yuri.S@arma.nl>
To: "Robert Collins" <robert.collins@itdomain.com.au>
Cc: "Squid-Users" <squid-users@ircache.net>
Sent: Tuesday, October 24, 2000 7:11 AM
Subject: RE: [SQU] How to install NTLM Authentication.

> Okay, i started from scratch
>
> created a csv dir
> entered that dir
>
> cvs -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid login
> #(no password just enter)
> cvs -z3 -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid
co -r
> ntlm squid
>
> #a squid dir was created (with content)
> cd squid
> autoconf
> #i get the following errors, but was told to ignore them
> #configure.in:915: warning: AC_TRY_RUN called without default to allow
> cross compiling
> #configure.in:1011: warning: AC_TRY_RUN called without default to allow
> cross compiling
> #configure.in:1012: warning: AC_TRY_RUN called without default to allow
> cross compiling
> #configure.in:1013: warning: AC_TRY_RUN called without default to allow
> cross compiling
> #configure.in:1287: warning: AC_TRY_RUN called without default to allow
> cross compiling
> autoheader
> #now I get these arrors, ignoring them assuming they have something to do
> with the previous ones
> #configure.in:915: warning: AC_TRY_RUN called without default to allow
> cross compiling
> #configure.in:1287: warning: AC_TRY_RUN called without default to allow
> cross compiling
> cd icons
> sh ./icons.shar
> cd ..
> mkdir build
> cd buils
>
../squid/configure --enable-ntlm-authentication --enable-ntlm-auth-modules="
> fakeauth" --enable-basic-authentication
> make
> #i get the follofing errors
> #Making all in ntlm_auth_modules...
> #make[1]: Entering directory `/usr/local/cvs/build/ntlm_auth_modules'
> #make[2]: Entering directory
> `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> #gcc -g -O2 -Wall -I. -I../../include -I../../../squid/include -c -o
> fakeauth_auth.o #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In function
> `ntlmGetString':
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:123: warning:
`c'
> might be used uninitialized in this #function
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In function
> `main':
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:241: warning:
> implicit declaration of function `base64#_encode_bin'
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:266: warning:
> implicit declaration of function `uudecode'
> #gcc -g fakeauth_auth.o -o
> fakeauth_auth -L../../lib -lmiscutil -lcrypt -lm -lresolv -lbsd -lnsl
> #make[2]: Leaving directory
> `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> #make[1]: Leaving directory `/usr/local/cvs/build/ntlm_auth_modules'
> #[root@lproxy build]#
>
> This propably won't work, will it.?
>
>
> Yuri
> -----Oorspronkelijk bericht-----
> Van: Robert Collins [mailto:robert.collins@itdomain.com.au]
> Verzonden: Tuesday, October 24, 2000 10:48 AM
> Aan: Yuri Sytema; Chemolli Francesco (USI)
> CC: Squid-Users
> Onderwerp: Re: [SQU] How to install NTLM Authentication.
>
>
> Your configure statement is wrong. I haven't looked at why you are getting
> errors just yet ( I am reworking the code anyway (not in CVS though)).
>
> the configure parameters are --enable-ntlm-authentication
> and --enable-basic-authentication
> not --enable-ntlm-auth
>
../squid/configure --enable-ntlm-auth --enable-basic-auth --enable-ntlm-auth
> -modules="NTLMSSP" --enable-delay-pools
>
> please try reconfiguring,
> Rob
>
> ----- Original Message -----
> From: "Yuri Sytema" <Yuri.S@arma.nl>
> To: "Chemolli Francesco (USI)" <ChemolliF@GruppoCredit.it>
> Cc: "Squid-Users" <squid-users@ircache.net>
> Sent: Tuesday, October 24, 2000 5:49 PM
> Subject: RE: [SQU] How to install NTLM Authentication.
>
>
> > Okay,
> >
> > ignored the following errors.
> >
> > [root@lproxy squid]# autoconf
> > configure.in:915: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > configure.in:1011: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > configure.in:1012: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > configure.in:1013: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > configure.in:1287: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > [root@lproxy squid]#
> >
> > [root@lproxy squid]# autoheader
> > configure.in:915: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > configure.in:1287: warning: AC_TRY_RUN called without default to allow
> cross
> > compiling
> > [root@lproxy squid]#
> >
> > used
> >
>
../squid/configure --enable-ntlm-auth --enable-basic-auth --enable-ntlm-auth
> > -modules="NTLMSSP" --enable-delay-pools
> > to configure squid
> > typed make and it stopped with:
> >
> > make[2]: Leaving directory `/usr/local/cvs/build/src/repl'
> > make[2]: Entering directory `/usr/local/cvs/build/src'
> > gcc -g -O2 -Wall -I. -I../include -I../../squid/include -c -o
> > access_log.o ../../squid/src/access_log.c
> > gcc -g -O2 -Wall -I. -I../include -I../../squid/include -c -o acl.o
> > ../../squid/src/acl.c
> > ../../squid/src/acl.c: In function `aclMatchProxyAuth':
> > ../../squid/src/acl.c:1466: warning: unreachable code at beginning of
> switch
> > statement
> > ../../squid/src/acl.c:1609: parse error before `static'
> > ../../squid/src/acl.c:1613: `first' undeclared (first use in this
> function)
> > ../../squid/src/acl.c:1613: (Each undeclared identifier is reported only
> > once
> > ../../squid/src/acl.c:1613: for each function it appears in.)
> > ../../squid/src/acl.c:1614: `prev' undeclared (first use in this
function)
> > ../../squid/src/acl.c:1616: warning: dereferencing `void *' pointer
> > ../../squid/src/acl.c:1616: request for member `i' in something not a
> > structure or union
> > ../../squid/src/acl.c:1616: `i' undeclared (first use in this function)
> > ../../squid/src/acl.c:1620: warning: dereferencing `void *' pointer
> > ../../squid/src/acl.c:1620: request for member `next' in something not a
> > structure or union
> > ../../squid/src/acl.c:1621: warning: dereferencing `void *' pointer
> > ../../squid/src/acl.c:1621: request for member `next' in something not a
> > structure or union
> > ../../squid/src/acl.c:1627: warning: dereferencing `void *' pointer
> > ../../squid/src/acl.c:1627: request for member `next' in something not a
> > structure or union
> > ../../squid/src/acl.c: In function `aclMatchAcl':
> > ../../squid/src/acl.c:1832: warning: implicit declaration of function
> > `aclMatchInteger'
> > make[2]: *** [acl.o] Error 1
> > make[2]: Leaving directory `/usr/local/cvs/build/src'
> > make[1]: *** [all] Error 2
> > make[1]: Leaving directory `/usr/local/cvs/build/src'
> > make: *** [all] Error 1
> > [root@lproxy build]#
> >
> > something must be wrong here..
> >
> > what did I do wrong?
> >
> >
> > -----Oorspronkelijk bericht-----
> > Van: Chemolli Francesco (USI) [mailto:ChemolliF@GruppoCredit.it]
> > Verzonden: Tuesday, October 24, 2000 8:32 AM
> > Aan: 'Yuri.S@arma.nl'
> > Onderwerp: RE: [SQU] How to install NTLM Authentication.
> >
> >
> >
> > > Hi
> > >
> > > Installed m4 and the autoconf/autoheader tools.
> > >
> > > when running autoconf i get the following error.
> > > What's wrong?
> > >
> > > [root@lproxy squid]# autoconf
> > > configure.in:915: warning: AC_TRY_RUN called without default
> > > to allow cross
> > > compiling
> > > configure.in:1011: warning: AC_TRY_RUN called without default
> > > to allow cross
> > > compiling
> > > configure.in:1012: warning: AC_TRY_RUN called without default
> > > to allow cross
> > > compiling
> > > configure.in:1013: warning: AC_TRY_RUN called without default
> > > to allow cross
> > > compiling
> > > configure.in:1287: warning: AC_TRY_RUN called without default
> > > to allow cross
> > > compiling
> > > [root@lproxy squid]#
> >
> > This is normal. You can safely ignore it.
> >
> > --
> > /kinkie
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html