Hi,
I am having problems with wccp, see my email :
STill no go, i am at witsend here, trying to get it going, here is
my cfg (i even installed the latest ver of RH on the server, still no go)
Cisco :
ip wccp enable
ip wccp redirect-list 110
int e 0 :
ip web-cache redirect
access-list 110 permit ip 203.19.222.0 0.0.0.255 any
access-list 110 permit ip 203.34.144.0 0.0.0.255 any
Linux :
/sbin/modprobe ip_wccp.o
echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/ipchains -A input -j ACCEPT -i lo
/sbin/ipchains -A input -j ACCEPT -p tcp -d 203.19.222.2 80
/sbin/ipchains -A input -j REDIRECT 8080 -p tcp -s 0.0.0.0/0 -d 0.0.0.0/0
80
Debug from Cisco :
3w6d: WCCP-PKT: Received valid Here_I_Am packet from 203.19.222.2
w/rcvd_id 000002BF
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
000002C0
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
000002C1
3w6d: WCCP-PKT: Received valid Here_I_Am packet from 203.19.222.2
w/rcvd_id 000002C1
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
000002C2
3w6d: WCCP-PKT: Received valid Here_I_Am packet from 203.19.222.2
w/rcvd_id 000002C2
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
000002C3
3w6d: WCCP-PKT: Received valid Here_I_Am packet from 203.19.222.2
w/rcvd_id 000002C3
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
w/rcvd_id 000002C3
3w6d: WCCP-PKT: Sending I_See_You packet to 203.19.222.2 w/ rcvd_id
000002C4
Sh ip wccp :
Global WCCP information:
Number of web-caches: 1
Total Packets Redirected: 623
Redirect access-list: 110
Total Packets Denied Redirect: 9230
Total Packets Unassigned: 0
Group access-list: -none-
Total Packets Denied to Group: 0
sh ip wccp web-caches :
WCCP Web-Cache information:
IP Address: 203.19.222.2
Protocol Version: 0.4
State: Usable
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 623
Connect Time: 00:20:52
Squid :
wccp_router 203.19.222.14
# TAG: wccp_version
# According to some users, Cisco IOS 11.2 only supports WCCP
# version 3. If you're using that version of IOS, change
# this value to 3.
wccp_version 4
To me the lot looks fine, when i change the default gw on the machine, i
am testing it with, and no proxy it works fine, its when i change it back
to the main router, its as though its not redirecting at the cisco end,
that I am not to sure on. When i debug the logging for ipchains, the
packets arent even getting passed fro the cisco to the ipchains rule, so i
cant see that there is communication between the cisco and the squid box.
I am using IOS 12.0(11)
Still nothing comes up in the squid logfiles for my ip address to say i am
accessing the proxy.
Any ideas?
--- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.auReceived on Tue Jun 27 2000 - 19:01:53 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:54:12 MST