Thanx Brian.
On Wed, 11 Feb 1998, Brian wrote:
> On Wed, 11 Feb 1998, A.Saeed wrote:
> 
> > dear fellows :
> > 
> > I have been following your steps.
> > Icouldn't be able to run ipfw with -r option it always says -r illegal and
> > -S needed etc. .
> > Please help me in this .
> > regards
> > 
> 
> 1. This will not work in older versions of ipfwadm, make sure you follow
> the link at the Squid FAQ and get the latest distribution, I use 2.3.0
> 
> constellation:~# ipfwadm -h
> ipfwadm 2.3.0, 1996/07/30
> 
> 
> 2. Make sure you compile your Linux kernel with Transparent Proxying,
> which is an experimental option, so make sure you enable "experimental
> drivers" in the kernel config:
> 
> constellation:~# man ipfwadm
>        -r [port]
>               Redirect  packets  to  a  local  socket.  When this
>               option is set, packets accepted by this  rule  will
>               be  redirected to a local socket, even if they were
>               sent to a remote host.  If the  specified  redirec-
>               tion  port  is  0,  which is the default value, the
>               destination port of a packet will be  used  as  the
>               redirection  port.   This  option  is only valid in
>               input firewall rules with  policy  accept  and  can
>               only be used when the Linux kernel is compiled with
>               CONFIG_IP_TRANSPARENT_PROXY defined.
> 
> 
> 
> Brian
> 
> 
> 
> 
> 
> 
> 
> 
> 
> > 
> > On Fri, 6 Feb 1998, Brian wrote:
> > 
> > > On Sat, 7 Feb 1998, Lincoln Dale wrote:
> > > 
> > > > >int e0
> > > > >ip policy route-map proxy-redirect
> > > > >
> > > > >IOS 11.1(6)
> > > > >
> > > > >I configured my netscape to use no proxies, and when I request a web page,
> > > > >i get nothing.  does anyone know what could commonly be the matter?
> > > > 
> > > > i assume ethernet0 isn't the interface to your uplink ISP?  you need
> > > > to put the policy-route statement on the *outgoing* interface, where
> > > > packets are destined, prior to being policy-routed to their correct
> > > > destination.
> > > > 
> > > > cheers,
> > > > 
> > > > lincoln.
> > > > 
> > > 
> > > Thanks! int s0 is outgoing, thanks, thats what i needed.
> > > 
> > > Brian
> > > 
> > > /-------------------------- signal@shreve.net -----------------------------\
> > > | Brian Feeny                | USR TC Hubs | ShreveNet Inc. (318)222-2638  |
> > > | Network Administrator      | Perl, Linux | Web hosting, online stores,   |
> > > | ShreveNet Inc.             |  USR Pilot  | Dial-Up 14.4-56k, ISDN & LANs |
> > > | 89 CRX DX w/MPFI, lots of  |-=*:Quake:*=-| http://www.shreve.net/        |
> > > | mods/Homepage coming soon  |LordSignal/SN| Quake server: 208.206.76.47   |
> > > \-------------------------- 318-222-2638 x109 -----------------------------/
> > > 
> > > 
> > 
> 
> /-------------------------- signal@shreve.net -----------------------------\
> | Brian Feeny                | USR TC Hubs | ShreveNet Inc. (318)222-2638  |
> | Network Administrator      | Perl, Linux | Web hosting, online stores,   |
> | ShreveNet Inc.             |  USR Pilot  | Dial-Up 14.4-56k, ISDN & LANs |
> | 89 CRX DX w/MPFI, lots of  |-=*:Quake:*=-| http://www.shreve.net/        |
> | mods/Homepage coming soon  |LordSignal/SN| Quake server: 208.206.76.47   |
> \-------------------------- 318-222-2638 x109 -----------------------------/
> 
> 
Received on Wed Feb 11 1998 - 07:55:34 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:38:51 MST