See <http://build.squid-cache.org/job/3.2-matrix/./label=master/293/changes>
Changes:
[Amos Jeffries] Bug 3567: Memory leak handling malformed requests
[Amos Jeffries] Bug 3735: raw-IPv6 domain URLs crash if IPv6-disabled
[Amos Jeffries] Bug 3732: Fix ConnOpener IPv6 awareness
When updating IPv6 support for split-stack one USE_IPV6 wrapper was
omitted conversion to the EnabledIpv6 stack auto-detect mechanism.
This resulted in IPv6 addresses being mis-converted on split-stack
systems or with IPv6 disabled in the kernel and --enable-ipv6 built.
The visible symptom is "assert(FALSE)" in Ip::Address::GetAddrInfo().
[Amos Jeffries] Initialize mem_node fully
Experience in squid-2.7 shows that with MemPools use of malloc instead
of calloc mem_node requires full initialization in order to get accurate
memory accounting.
Also closes Coverity Scan defect issue 740573.
[Amos Jeffries] Bug 3736: Floating point exception due to divide by zero
[Amos Jeffries] Fix "address.GetPort() != 0" assertion for helpers on FreeBSD (at least).
The order (or set of?) #include files used by src/ssl/helper.cc (and
probably by other helper source files) has changed recently, exposing a
defines.h dependency on sys/socket.h where that system header is
required to define AF_UNIX. With AF_UNIX incorrectly undefined,
IPC_STREAM was set to IPC_TCP_SOCKET instead of IPC_UNIX_STREAM, and
helpers that do not have a notion of a listening port, were trying to
create communication sockets using TCP streams, triggering a "must have
a port" assertion in comm_connect_addr() called from ipcCreate().
TODO: Moving IPC_* defines into an IPC-specific header file may be a
better solution then exposing all defines.h users to sys/socket.h.
[Amos Jeffries] WCCP: Fix memory leak in mask assignment, improve debuggsing.
* Release temporary weight array allocated on each HERE_I_AM packet sent
by Squid. For mask assignment these were not released properly and may
build up to a significant size of memory over time.
* Add debug traces to send() events to report failures sending packets
* Also, on HERE_I_AM event send() failure, reduce the timeout to 2sec
for the retry in a crude attempt to prevent router state flapping.
* Silence compiler warnings on use of connect() to disconnect a socket.
Inconsistent OS behaviour makes the result useless in this case.
Detected by Coverity Scan. Issues 740329, 740330, 740331, 740332,
740333, 740441.
[Amos Jeffries] Polish quick_abort feature decision code
Also, fixes a defect identified by Coverity Scan issues 740376, 740456
[Amos Jeffries] Fix memory leak in IP address unit test
Another failure to call FreeAddrInfo() after calling GetAddrInfo().
Detected by Coverity Scan. Issue 740438.
[Amos Jeffries] Fix memory leaks in ICMP
InitAddrInfo() and GetAddrInfo() both allocate addrinfo structs which
must be freed by FreeAddrInfo(). Several places in ICMP were not doing
that free step.
Detected by Coverity Scan. Issues 740434, 740435, 740436, 740437.
[Amos Jeffries] Bug 3729: 32-bit overflow in parsing 64-bit configuration values
[Amos Jeffries] Fix various Disk I/O issues in all modules
* Uninitialized class members.
* Handle NULL potential after several dynamic_cast.
* Better error result handling from several system functions
lseek(), fcntl() can report errors which need handling.
* diskd explicit NULL dereference on broken input.
Extremely unlikely, but worth protecting against.
Detected by Coverity Scan. Issues 740510, 740358, 740359,
740511, 740317, 740360, 740513, 740318, 740514
[Amos Jeffries] Fix error in config parser which would mis-assign the sslcrlfile directive.
Also, fix potentially crashing flaw in CPU affinity map display code.
Detected by Coverity Scan, defects 740336 and 740337.
[Amos Jeffries] Plugged memory leaks in digest authentication module
Detected by Coverity Scan. Issue 740431.
[Amos Jeffries] Bug 3728: Improve debug for cache_dir
[Amos Jeffries] Make sure copied strings are properly terminated in snmplib and wccp2
[Amos Jeffries] Fix various issues in snmplib
* Memory leaks in OID management
* NULL pointer dereference on OID tree creation
* Ensure buffer terminations on OID data copy
* Better file handle management
Detected by Coverity Scan. Issues 740480, 740357, 740429,
443111, 740479, 740500
[Amos Jeffries] Fix various issues in smblib
* Crash on NTLM handshakes without domain.
* Memory leak on several internal DC connection failures
* Potential buffer overruns on specially crafted tokens
Detected by Coverity Scan. Issues 740356, 740406, 740428,
740476, 740477, 740478
------------------------------------------
[...truncated 5344 lines...]
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo int.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT int.o -MD -MP -MF "$depbase.Tpo" -c -o int.o ../../src/int.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo internal.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT internal.o -MD -MP -MF "$depbase.Tpo" -c -o internal.o ../../src/internal.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ipc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT ipc.o -MD -MP -MF "$depbase.Tpo" -c -o ipc.o ../../src/ipc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ipcache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT ipcache.o -MD -MP -MF "$depbase.Tpo" -c -o ipcache.o ../../src/ipcache.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo list.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT list.o -MD -MP -MF "$depbase.Tpo" -c -o list.o ../../src/list.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT main.o -MD -MP -MF "$depbase.Tpo" -c -o main.o ../../src/main.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT mem.o -MD -MP -MF "$depbase.Tpo" -c -o mem.o ../../src/mem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mem_node.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT mem_node.o -MD -MP -MF "$depbase.Tpo" -c -o mem_node.o ../../src/mem_node.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemBuf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT MemBuf.o -MD -MP -MF "$depbase.Tpo" -c -o MemBuf.o ../../src/MemBuf.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemObject.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT MemObject.o -MD -MP -MF "$depbase.Tpo" -c -o MemObject.o ../../src/MemObject.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mime.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT mime.o -MD -MP -MF "$depbase.Tpo" -c -o mime.o ../../src/mime.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mime_header.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT mime_header.o -MD -MP -MF "$depbase.Tpo" -c -o mime_header.o ../../src/mime_header.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo multicast.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT multicast.o -MD -MP -MF "$depbase.Tpo" -c -o multicast.o ../../src/multicast.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo neighbors.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT neighbors.o -MD -MP -MF "$depbase.Tpo" -c -o neighbors.o ../../src/neighbors.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Packer.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT Packer.o -MD -MP -MF "$depbase.Tpo" -c -o Packer.o ../../src/Packer.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Parsing.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT Parsing.o -MD -MP -MF "$depbase.Tpo" -c -o Parsing.o ../../src/Parsing.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo pconn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT pconn.o -MD -MP -MF "$depbase.Tpo" -c -o pconn.o ../../src/pconn.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_digest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT peer_digest.o -MD -MP -MF "$depbase.Tpo" -c -o peer_digest.o ../../src/peer_digest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_proxy_negotiate_auth.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT peer_proxy_negotiate_auth.o -MD -MP -MF "$depbase.Tpo" -c -o peer_proxy_negotiate_auth.o ../../src/peer_proxy_negotiate_auth.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_select.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT peer_select.o -MD -MP -MF "$depbase.Tpo" -c -o peer_select.o ../../src/peer_select.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_sourcehash.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT peer_sourcehash.o -MD -MP -MF "$depbase.Tpo" -c -o peer_sourcehash.o ../../src/peer_sourcehash.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_userhash.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT peer_userhash.o -MD -MP -MF "$depbase.Tpo" -c -o peer_userhash.o ../../src/peer_userhash.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo redirect.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT redirect.o -MD -MP -MF "$depbase.Tpo" -c -o redirect.o ../../src/redirect.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo refresh.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT refresh.o -MD -MP -MF "$depbase.Tpo" -c -o refresh.o ../../src/refresh.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo RemovalPolicy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT RemovalPolicy.o -MD -MP -MF "$depbase.Tpo" -c -o RemovalPolicy.o ../../src/RemovalPolicy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo send-announce.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT send-announce.o -MD -MP -MF "$depbase.Tpo" -c -o send-announce.o ../../src/send-announce.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemBlob.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT MemBlob.o -MD -MP -MF "$depbase.Tpo" -c -o MemBlob.o ../../src/MemBlob.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo snmp_core.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT snmp_core.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_core.o ../../src/snmp_core.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo snmp_agent.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT snmp_agent.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_agent.o ../../src/snmp_agent.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidMath.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SquidMath.o -MD -MP -MF "$depbase.Tpo" -c -o SquidMath.o ../../src/SquidMath.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidNew.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SquidNew.o -MD -MP -MF "$depbase.Tpo" -c -o SquidNew.o ../../src/SquidNew.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stat.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT stat.o -MD -MP -MF "$depbase.Tpo" -c -o stat.o ../../src/stat.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StatCounters.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StatCounters.o -MD -MP -MF "$depbase.Tpo" -c -o StatCounters.o ../../src/StatCounters.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StatHist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StatHist.o -MD -MP -MF "$depbase.Tpo" -c -o StatHist.o ../../src/StatHist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo String.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT String.o -MD -MP -MF "$depbase.Tpo" -c -o String.o ../../src/String.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stmem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT stmem.o -MD -MP -MF "$depbase.Tpo" -c -o stmem.o ../../src/stmem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store.o -MD -MP -MF "$depbase.Tpo" -c -o store.o ../../src/store.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreFileSystem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreFileSystem.o -MD -MP -MF "$depbase.Tpo" -c -o StoreFileSystem.o ../../src/StoreFileSystem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_io.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_io.o -MD -MP -MF "$depbase.Tpo" -c -o store_io.o ../../src/store_io.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreIOState.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreIOState.o -MD -MP -MF "$depbase.Tpo" -c -o StoreIOState.o ../../src/StoreIOState.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_client.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_client.o -MD -MP -MF "$depbase.Tpo" -c -o store_client.o ../../src/store_client.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_digest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_digest.o -MD -MP -MF "$depbase.Tpo" -c -o store_digest.o ../../src/store_digest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_dir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_dir.o -MD -MP -MF "$depbase.Tpo" -c -o store_dir.o ../../src/store_dir.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_key_md5.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_key_md5.o -MD -MP -MF "$depbase.Tpo" -c -o store_key_md5.o ../../src/store_key_md5.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_log.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_log.o -MD -MP -MF "$depbase.Tpo" -c -o store_log.o ../../src/store_log.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_rebuild.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_rebuild.o -MD -MP -MF "$depbase.Tpo" -c -o store_rebuild.o ../../src/store_rebuild.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapin.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapin.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapin.o ../../src/store_swapin.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapmeta.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapmeta.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapmeta.o ../../src/store_swapmeta.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapout.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapout.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapout.o ../../src/store_swapout.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMeta.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMeta.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMeta.o ../../src/StoreMeta.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaMD5.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaMD5.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaMD5.o ../../src/StoreMetaMD5.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaSTD.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaSTD.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaSTD.o ../../src/StoreMetaSTD.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaSTDLFS.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaSTDLFS.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaSTDLFS.o ../../src/StoreMetaSTDLFS.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaUnpacker.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaUnpacker.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaUnpacker.o ../../src/StoreMetaUnpacker.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaURL.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaURL.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaURL.o ../../src/StoreMetaURL.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaVary.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaVary.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaVary.o ../../src/StoreMetaVary.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreStats.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreStats.o -MD -MP -MF "$depbase.Tpo" -c -o StoreStats.o ../../src/StoreStats.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreSwapLogData.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreSwapLogData.o -MD -MP -MF "$depbase.Tpo" -c -o StoreSwapLogData.o ../../src/StoreSwapLogData.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Server.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT Server.o -MD -MP -MF "$depbase.Tpo" -c -o Server.o ../../src/Server.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SwapDir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SwapDir.o -MD -MP -MF "$depbase.Tpo" -c -o SwapDir.o ../../src/SwapDir.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemStore.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT MemStore.o -MD -MP -MF "$depbase.Tpo" -c -o MemStore.o ../../src/MemStore.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT tools.o -MD -MP -MF "$depbase.Tpo" -c -o tools.o ../../src/tools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tunnel.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT tunnel.o -MD -MP -MF "$depbase.Tpo" -c -o tunnel.o ../../src/tunnel.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo unlinkd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT unlinkd.o -MD -MP -MF "$depbase.Tpo" -c -o unlinkd.o ../../src/unlinkd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo url.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT url.o -MD -MP -MF "$depbase.Tpo" -c -o url.o ../../src/url.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo URLScheme.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT URLScheme.o -MD -MP -MF "$depbase.Tpo" -c -o URLScheme.o ../../src/URLScheme.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo urn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT urn.o -MD -MP -MF "$depbase.Tpo" -c -o urn.o ../../src/urn.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo wccp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT wccp.o -MD -MP -MF "$depbase.Tpo" -c -o wccp.o ../../src/wccp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo wccp2.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT wccp2.o -MD -MP -MF "$depbase.Tpo" -c -o wccp2.o ../../src/wccp2.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo whois.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT whois.o -MD -MP -MF "$depbase.Tpo" -c -o whois.o ../../src/whois.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
cc1plus: warnings being treated as errors
../../src/wccp2.cc: In function ‘void wccp2HereIam(void*)’:
../../src/wccp2.cc:1614: warning: comparison between signed and unsigned integer expressions
make[4]: *** [wccp2.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_build/src'>
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_build/src'>
make[2]: *** [all] Error 2
make[2]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_build/src'>
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-00-default/squid-3.2.6-BZR/_build'>
make: *** [distcheck] Error 2
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-00-default.opts
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS: -Wall -g -O2
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -g -O2
configure: BUILD EXTRA C++ FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS: -Wall -g -O2
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -g -O2
configure: BUILD EXTRA C++ FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
make[4]: *** [wccp2.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [distcheck] Error 2
Build FAILED.
Build step 'Execute shell' marked build as failure
Received on Mon Jan 28 2013 - 12:14:23 MST
This archive was generated by hypermail 2.2.0 : Tue Jan 29 2013 - 12:00:21 MST