Build failed in Hudson: 3.HEAD-amd64-CentOS-5.3 #736

See <http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/736/changes>

Changes:

[Amos Jeffries <squid3_at_treenet.co.nz>] Permit rotate logs from cachemgr

Given that reconfigure, shutdown and offline already have password-protected
remote actions available it makes sense to permit the less critical rotate
as well.

[Amos Jeffries <squid3_at_treenet.co.nz>] Author: Markus Moeller <huaraz_at_moeller.plus.com>
Helper: ext_kerberos_ldap_group_acl: Lookup Kerberos/NTLM group via LDAP

------------------------------------------
[...truncated 2707 lines...]
checking for net/pfvar.h... no
checking for sys/mount.h... yes
checking for resolv.h... yes
checking for an ANSI C-conforming const... yes
checking whether byte ordering is bigendian... no
checking whether struct tm is in sys/time.h or time.h... time.h
checking for struct tm.tm_gmtoff... yes
checking for struct mallinfo... yes
checking for struct mallinfo.mxfast... no
checking for struct rusage... yes
checking for struct iphdr.ip_hl... yes
checking for void *... yes
checking size of void *... 8
checking for int8_t... yes
checking for uint8_t... yes
checking for int16_t... yes
checking for uint16_t... yes
checking for int32_t... yes
checking for uint32_t... yes
checking for int64_t... yes
checking for uint64_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for ssize_t... yes
checking for off_t... yes
checking for uid_t in sys/types.h... yes
checking for int64_t... yes
checking size of int64_t... 8
checking for long... yes
checking size of long... 8
checking for pad128_t... no
checking for upad128_t... no
checking for mode_t... yes
checking for fd_mask... yes
checking for socklen_t... yes
checking for mtyp_t... no
checking for working alloca.h... yes
checking for alloca... yes
checking sys/capability.h usability... yes
checking sys/capability.h presence... yes
checking for sys/capability.h... yes
checking for cap_clear_flag in -lcap... no
checking for operational libcap2 headers... no
configure: libcap support enabled: no
configure: libcap2 headers are ok: no
checking for library containing gethostbyname... none required
checking for library containing res_init... no
checking for library containing bind... none required
checking for library containing opcom_stack_trace... no
checking for library containing strlcpy... no
checking for library containing yp_match... -lnsl
checking for unix domain sockets... yes
checking for malloc in -lgnumalloc... no
checking for main in -lmalloc... no
checking for library containing rint... -lm
checking for library containing log... none required
checking Default FD_SETSIZE value... 1024
checking Maximum number of filedescriptors we can open... 1024
checking whether to enable IPv6... yes
checking for sin6_len field in struct sockaddr_in6... no
checking for ss_len field in struct sockaddr_storage... no
checking for sin_len field in struct sockaddr_in... no
checking for crypt in -lcrypt... yes
checking for MD5Init in -lmd5... no
checking for crypt... yes
checking for ldap_init in -lldap... yes
checking for ber_init in -llber... yes
checking for ldap.h... (cached) yes
checking for lber.h... (cached) yes
checking mozldap/ldap.h usability... no
checking mozldap/ldap.h presence... no
checking for mozldap/ldap.h... no
checking for LDAP_OPT_DEBUG_LEVEL... yes
checking for working ldap... yes
checking for OpenLDAP... yes
checking for Sun LDAP SDK... no
checking for Mozilla LDAP SDK... no
checking for LDAP_REBINDPROC_CALLBACK... no
checking for LDAP_REBIND_PROC... yes
checking for LDAP_REBIND_FUNCTION... no
checking for LDAP_SCOPE_DEFAULT... yes
checking for struct ldap_url_desc.lud_scheme... yes
checking for ldapssl_client_init in -lldap... no
checking for ldap_url_desc2str in -lldap... yes
checking for ldap_url_parse in -lldap... yes
checking whether dbopen is declared... yes
checking if dbopen needs -ldb... yes
checking for backtrace_symbols_fd... yes
checking for bcopy... yes
checking for bswap_16... no
checking for bswap_32... no
checking for bswap16... no
checking for bswap32... no
checking for fchmod... yes
checking for getdtablesize... yes
checking for getpagesize... yes
checking for getpass... yes
checking for getrlimit... yes
checking for getrusage... yes
checking for getspnam... yes
checking for gettimeofday... yes
checking for glob... yes
checking for htobe16... no
checking for htole16... no
checking for kqueue... no
checking for lrand48... yes
checking for mallinfo... yes
checking for mallocblksize... no
checking for mallopt... yes
checking for memcpy... yes
checking for memmove... yes
checking for memset... yes
checking for mkstemp... yes
checking for mktime... yes
checking for mstats... no
checking for poll... yes
checking for prctl... yes
checking for pthread_attr_setschedparam... yes
checking for pthread_attr_setscope... yes
checking for pthread_setschedparam... yes
checking for pthread_sigmask... no
checking for putenv... yes
checking for random... yes
checking for regcomp... yes
checking for regexec... yes
checking for regfree... yes
checking for res_init... no
checking for __res_init... yes
checking for rint... yes
checking for sbrk... yes
checking for select... yes
checking for seteuid... yes
checking for setgroups... yes
checking for setpgrp... yes
checking for setrlimit... yes
checking for setsid... yes
checking for sigaction... yes
checking for snprintf... yes
checking for socketpair... yes
checking for srand48... yes
checking for srandom... yes
checking for statfs... yes
checking for sysconf... yes
checking for syslog... yes
checking for timegm... yes
checking for vsnprintf... yes
checking for drand48... yes
checking for eui64_aton... no
checking for inet_ntop... yes
checking for inet_pton... yes
checking for initgroups... yes
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for strerror... yes
checking for strsep... yes
checking for strtoll... yes
checking for tempnam... yes
configure: Using epoll for the IO loop.
checking if setresuid is actually implemented... no
checking if strnstr is well implemented... no
checking if va_copy is implemented... yes
checking if __va_copy is implemented... yes
configure: IPF-based transparent proxying enabled: no
configure: Support for Netfilter-based interception proxy requested: yes
configure: WARNING: Missing needed capabilities (libcap or libcap2) for TPROXY
configure: WARNING: Linux Transparent Proxy support WILL NOT be enabled
configure: WARNING: Reduced support to Interception Proxy
checking for regexec in -lregex... no
checking if the system-supplied regex lib actually works... yes
checking if GNUregex needs to be compiled... no
checking Default UDP send buffer size... 129024
checking Default UDP receive buffer size... 129024
checking Default TCP send buffer size... 16384
checking Default TCP receive buffer size... 87380
configure: Limiting receive buffer size to 64K
checking if sys_errlist is already defined... yes
checking for system-provided MAXPATHLEN... yes
checking for working statvfs() interface... yes
checking whether po2html executable path has been provided... no
checking for po2html... no
configure: Multi-Language support enabled: yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating compat/Makefile
config.status: creating lib/Makefile
config.status: creating libntlmauth/Makefile
config.status: creating scripts/Makefile
config.status: creating src/Makefile
config.status: creating src/base/Makefile
config.status: creating src/acl/Makefile
config.status: creating src/fs/Makefile
config.status: creating src/repl/Makefile
config.status: creating src/auth/Makefile
config.status: creating src/adaptation/Makefile
config.status: creating src/adaptation/icap/Makefile
config.status: creating src/adaptation/ecap/Makefile
config.status: creating src/comm/Makefile
config.status: creating src/esi/Makefile
config.status: creating src/eui/Makefile
config.status: creating src/icmp/Makefile
config.status: creating src/ident/Makefile
config.status: creating src/ip/Makefile
config.status: creating src/log/Makefile
config.status: creating src/ipc/Makefile
config.status: creating contrib/Makefile
config.status: creating snmplib/Makefile
config.status: creating icons/Makefile
config.status: creating errors/Makefile
config.status: creating test-suite/Makefile
config.status: creating doc/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating helpers/Makefile
config.status: creating helpers/basic_auth/Makefile
config.status: creating helpers/basic_auth/DB/Makefile
config.status: creating helpers/basic_auth/fake/Makefile
config.status: creating helpers/basic_auth/getpwnam/Makefile
config.status: creating helpers/basic_auth/LDAP/Makefile
config.status: creating helpers/basic_auth/MSNT/Makefile
config.status: creating helpers/basic_auth/MSNT-multi-domain/Makefile
config.status: creating helpers/basic_auth/NCSA/Makefile
config.status: creating helpers/basic_auth/NIS/Makefile
config.status: creating helpers/basic_auth/PAM/Makefile
config.status: creating helpers/basic_auth/POP3/Makefile
config.status: creating helpers/basic_auth/RADIUS/Makefile
config.status: creating helpers/basic_auth/SASL/Makefile
config.status: creating helpers/basic_auth/SMB/Makefile
config.status: creating helpers/basic_auth/SSPI/Makefile
config.status: creating helpers/digest_auth/Makefile
config.status: creating helpers/digest_auth/eDirectory/Makefile
config.status: creating helpers/digest_auth/file/Makefile
config.status: creating helpers/digest_auth/LDAP/Makefile
config.status: creating helpers/ntlm_auth/Makefile
config.status: creating helpers/ntlm_auth/fake/Makefile
config.status: creating helpers/ntlm_auth/smb_lm/Makefile
config.status: creating helpers/ntlm_auth/SSPI/Makefile
config.status: creating helpers/negotiate_auth/Makefile
config.status: creating helpers/negotiate_auth/kerberos/Makefile
config.status: creating helpers/negotiate_auth/SSPI/Makefile
config.status: creating helpers/external_acl/Makefile
config.status: creating helpers/external_acl/AD_group/Makefile
config.status: creating helpers/external_acl/eDirectory_userip/Makefile
config.status: creating helpers/external_acl/file_userip/Makefile
config.status: error: cannot find input file: helpers/external_acl/kerberos_ldap_group/Makefile.in
make: *** [distcheck] Error 1
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-00-default.opts
config.status: error: cannot find input file: helpers/external_acl/kerberos_ldap_group/Makefile.in
make: *** [distcheck] Error 1
Build FAILED.
Received on Fri Aug 13 2010 - 12:06:12 MDT