Re: Problem compiling on HP-UX 11i (32 Bit).

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Yes, exacly what I thought. Ouch for HP and problematic for us..

Bug:

The HP make program misreads makefiles with blank continuation lines.

someline \
[any number of blank lines with only whitespace]
anotherline

is misread as the single line

someline anotherline

Now we should try to find a workaround...

What does HP make return on the following Makefile:

- --- CUT HERE ---
TEST1 = \

# comment
TEST2 = Hello There

all:
        @echo "This should be empty: '$(TEST1)'"
- --- END CUT HERE ---

If this does not work, I am afraid that the HP make program won't ever be
usable to build Squid, and you must use GNU make.

No matter the outcome of the above test I'd also recommend calling your HP
support contact to register the problem and have them fix it.

Regards
Henrik Nordström
Squid Developer

On Sunday 06 January 2002 12.57, Young, Jason wrote:
> Henrik,
>
> I did as suggested and here is the outcome.
>
> ################################################
>
> bneweb2:/data1/test# ll
> total 2
> -rw------- 1 root sys 153 Jan 6 21:53 Makefile
> bneweb2:/data1/test# make
> The next line should read 'Hello There'
> TESTVAR2 = Hello There
> bneweb2:/data1/test#
>
> ################################################
>
> Is this what you expected?
>
> Regards
>
> Jason Young
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Friday, 4 January 2002 7:35 PM
> To: Young, Jason; 'squid-dev@squid-cache.org'
> Subject: Re: Problem compiling on HP-UX 11i (32 Bit).
>
>
> Ok.. The HP-UX make defenitely seems to be a bit odd, buggy even.
>
> Can you please ruin the following small test to verify that I have
> understood
> the nature of the problem correct:
>
>
> ---- cut here ------
> TESTVAR1 = \
>
>
> TESTVAR2 = Hello
>
>
> TESTVAR3 = \
> There
>
>
> all:
> @echo "The next line should read 'Hello There'"
> @echo $(TESTVAR1) $(TESTVAR2) $(TESTVAR3)
> ---- end of snippet -----
>
>
> Create a new directory and save the above as Makefile, then run make.
>
> Regards
> Henrik
>
> On Friday 04 January 2002 08.15, Young, Jason wrote:
> > Henrik,
> >
> > Thanks for the help. I downloaded the 2.5 release as suggested and
> > tried the recompile again. It stops with different error this time
> > when you run the "make all". The output from the command was as
> > attached.
> >
> > Any further ideas?
> >
> > Regards
> >
> > Jason Young
> >
> > ####### Output Below #######
> >
> > bneweb2:/data1/source/squid/squid-2.5.PRE2# make all
> > No suffix list.
> > Making all in lib
> > source='Array.c' object='Array.o' libtool=no \
> > depfile='.deps/Array.Po' tmpdepfile='.deps/Array.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f Array.c || echo './'`Array.c
> > source='base64.c' object='base64.o' libtool=no \
> > depfile='.deps/base64.Po' tmpdepfile='.deps/base64.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f base64.c || echo './'`base64.c
> > source='getfullhostname.c' object='getfullhostname.o'
> > libtool=no \ depfile='.deps/getfullhostname.Po'
> > tmpdepfile='.deps/getfullhostname.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f getfullhostname.c || echo './'`getfullhostname.c
> > source='hash.c' object='hash.o' libtool=no \
> > depfile='.deps/hash.Po' tmpdepfile='.deps/hash.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f hash.c || echo './'`hash.c
> > source='heap.c' object='heap.o' libtool=no \
> > depfile='.deps/heap.Po' tmpdepfile='.deps/heap.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f heap.c || echo './'`heap.c
> > source='html_quote.c' object='html_quote.o' libtool=no \
> > depfile='.deps/html_quote.Po'
> > tmpdepfile='.deps/html_quote.TPo' \ depmode=hp /bin/sh
> > ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f html_quote.c || echo './'`html_quote.c
> > source='iso3307.c' object='iso3307.o' libtool=no \
> > depfile='.deps/iso3307.Po' tmpdepfile='.deps/iso3307.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f iso3307.c || echo './'`iso3307.c
> > source='md5.c' object='md5.o' libtool=no \
> > depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f md5.c || echo './'`md5.c
> > source='radix.c' object='radix.o' libtool=no \
> > depfile='.deps/radix.Po' tmpdepfile='.deps/radix.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f radix.c || echo './'`radix.c
> > source='rfc1035.c' object='rfc1035.o' libtool=no \
> > depfile='.deps/rfc1035.Po' tmpdepfile='.deps/rfc1035.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f rfc1035.c || echo './'`rfc1035.c
> > source='rfc1123.c' object='rfc1123.o' libtool=no \
> > depfile='.deps/rfc1123.Po' tmpdepfile='.deps/rfc1123.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f rfc1123.c || echo './'`rfc1123.c
> > source='rfc1738.c' object='rfc1738.o' libtool=no \
> > depfile='.deps/rfc1738.Po' tmpdepfile='.deps/rfc1738.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f rfc1738.c || echo './'`rfc1738.c
> > source='rfc2617.c' object='rfc2617.o' libtool=no \
> > depfile='.deps/rfc2617.Po' tmpdepfile='.deps/rfc2617.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f rfc2617.c || echo './'`rfc2617.c
> > source='safe_inet_addr.c' object='safe_inet_addr.o' libtool=no
> > \ depfile='.deps/safe_inet_addr.Po'
> > tmpdepfile='.deps/safe_inet_addr.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f safe_inet_addr.c || echo './'`safe_inet_addr.c
> > source='splay.c' object='splay.o' libtool=no \
> > depfile='.deps/splay.Po' tmpdepfile='.deps/splay.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f splay.c || echo './'`splay.c
> > source='Stack.c' object='Stack.o' libtool=no \
> > depfile='.deps/Stack.Po' tmpdepfile='.deps/Stack.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f Stack.c || echo './'`Stack.c
> > source='stub_memaccount.c' object='stub_memaccount.o'
> > libtool=no \ depfile='.deps/stub_memaccount.Po'
> > tmpdepfile='.deps/stub_memaccount.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f stub_memaccount.c || echo './'`stub_memaccount.c
> > source='util.c' object='util.o' libtool=no \
> > depfile='.deps/util.Po' tmpdepfile='.deps/util.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f util.c || echo './'`util.c
> > cc: "util.c", line 754: warning 562: Redeclaration of
> > "default_failure_notify" with a different storage class specifier:
> > "default_failure_notify" will have internal linkage.
> > source='uudecode.c' object='uudecode.o' libtool=no \
> > depfile='.deps/uudecode.Po' tmpdepfile='.deps/uudecode.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f uudecode.c || echo './'`uudecode.c
> > rm -f libmiscutil.a
> > ar cru libmiscutil.a Array.o base64.o getfullhostname.o
> > hash.o heap.o html_quote.o iso3307.o md5.o radix.o rfc1035.o
> > rfc1123.o rfc1738.o rfc2617.o safe_inet_addr.o splay.o Stack.o
> > stub_memaccount.o util.o uudecode.o # ../include/version.h should be a
> > dependency
> >
> > : libmiscutil.a
> >
> > source='ntlmauth.c' object='ntlmauth.o' libtool=no \
> > depfile='.deps/ntlmauth.Po' tmpdepfile='.deps/ntlmauth.TPo' \
> > depmode=hp /bin/sh ../cfgaux/depcomp \
> > cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test
> > -f ntlmauth.c || echo './'`ntlmauth.c
> > rm -f libntlmauth.a
> > ar cru libntlmauth.a ntlmauth.o INCLUDES = -I../include
> > -I../include ar: No such file or directory
> > ar: could not open INCLUDES
> > ar: No such file or directory
> > ar: could not open =
> > ar: No such file or directory
> > ar: could not open -I../include
> > ar: No such file or directory
> > ar: could not open -I../include
> > *** Error exit code 4
> >
> > Stop.
> > *** Error exit code 1
> >
> > Stop.
> >
> > -----Original Message-----
> > From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> > Sent: Friday, 4 January 2002 1:26 PM
> > To: Young, Jason; 'squid-bugs@squid-cache.org'
> > Subject: Re: Problem compiling on HP-UX 11i (32 Bit).
> >
> >
> > Can you please try the Squid-2.5.PRE2 pre-release? The makefiles have
> > been considerably restructured to increase portability and flexibility
> > in Squid-2.5.
> >
> >
> > If you can not, Squid-2.4 should build fine on HP-UX using GNU make,
> > but
>
> it
>
> > would be of great help if you tried the 2.5.PRE2 version and reported
> > any success or failure in building that release to
> > squid-dev@squid-cache.org.
> >
> > Regards
> > Henrik
> >
> > On Friday 04 January 2002 01.28, Young, Jason wrote:
> > > Hi,
> > >
> > > I am trying to compile squid on our HP-UX 11.11 (11i) system. The
> > > box
>
> is
>
> > > running the 32bit version of the OS. I have downloaded the latest
> > > version of squid2.4 from the web site, the "configure" command seems
> > > to run ok but when I run the "make all" command I get a syntax error
> > > on
>
> line
>
> > > 228. The system is a full copy of 11.11 Enterprise and I have also
> > > load the full HP ANSI-C Compiler onto the box.
> > >
> > > Any ideas as to why it does not compile?
> > >
> > > Regards
> > >
> > > Jason Young
> > >
> > > ===================================================================
> > >
> > > bneweb2:/data1/source/squid/squid-2.4# make all
> > > Making all in lib...
> > > cc -Ae -g -I../include -I../include -c rfc1123.c
> > > cc -Ae -g -I../include -I../include -c rfc1738.c
> > > cc -Ae -g -I../include -I../include -c rfc1035.c
> > > cc -Ae -g -I../include -I../include -c util.c
> > > cc: "util.c", line 751: warning 562: Redeclaration of
> > > "default_failure_notify" with a different storage class specifier:
> > > "default_failure_notify" will have internal linkage.
> > > cc -Ae -g -I../include -I../include -c getfullhostname.c
> > > cc -Ae -g -I../include -I../include -c base64.c
> > > cc -Ae -g -I../include -I../include -c uudecode.c
> > > cc -Ae -g -I../include -I../include -c splay.c
> > > cc -Ae -g -I../include -I../include -c safe_inet_addr.c
> > > cc -Ae -g -I../include -I../include -c iso3307.c
> > > cc -Ae -g -I../include -I../include -c snprintf.c
> > > cc -Ae -g -I../include -I../include -c md5.c
> > > cc -Ae -g -I../include -I../include -c radix.c
> > > cc -Ae -g -I../include -I../include -c stub_memaccount.c
> > > cc -Ae -g -I../include -I../include -c Array.c
> > > cc -Ae -g -I../include -I../include -c Stack.c
> > > cc -Ae -g -I../include -I../include -c hash.c
> > > cc -Ae -g -I../include -I../include -c heap.c
> > > cc -Ae -g -I../include -I../include -c html_quote.c
> > > /usr/bin/rm -f libmiscutil.a
> > > /usr/bin/ar r libmiscutil.a rfc1123.o rfc1738.o rfc1035.o
> >
> > util.o
> >
> > > getfullhostname.o base64.o uudecode.o splay.o safe_inet_addr.o
> > > iso3307.o snprintf.o md5.o radix.o stub_memaccount.o Array.o
> > > Stack.o hash.o heap.o html_quote.o
> > > ar: creating libmiscutil.a
> > >
> > > : libmiscutil.a
> > >
> > > Making all in scripts...
> > > Making all in src...
> > > Make: line 228: syntax error. Stop.
> > > *** Error exit code 1
> > >
> > > Stop.
> > >
> > > ===================================================================
> > >
> > > The Configure command completes without and errors :
> > >
> > > ===================================================================
> > >
> > > bneweb2:/data1/source/squid/squid-2.4# ./configure
> > > --prefix=/data1/squid creating cache ./config.cache
> > > checking host system type... hppa1.1-hp-hpux11.11
> > > checking for gcc... no
> > > checking for cc... cc
> > > checking whether the C compiler (cc -g) works... yes
> > > checking whether the C compiler (cc -g) is a cross-compiler... no
> > > checking whether we are using GNU C... no
> > > checking whether cc accepts -g... yes
> > > Store modules built: ufs
> > > Removal policies built: lru
> > > unlinkd enabled
> > > adding '-Ae' to cc args for hppa1.1-hp-hpux11.11
> > > checking how to run the C preprocessor... cc -Ae -E
> > > checking for a BSD compatible install... /opt/imake/bin/install -c
> > > checking for ranlib... ranlib
> > > checking whether ln -s works... yes
> > > checking for sh... /usr/bin/sh
> > > checking for false... /usr/bin/false
> > > checking for true... /usr/bin/true
> > > checking for rm... /usr/bin/rm
> > > checking for mv... /usr/bin/mv
> > > checking for mkdir... /usr/bin/mkdir
> > > checking for ln... /usr/bin/ln
> > > checking for perl... /usr/contrib/bin/perl
> > > checking for makedepend... /opt/imake/bin/makedepend
> > > checking for ar... /usr/bin/ar
> > > Disabling 'ranlib' for HP-UX...
> > > checking for dirent.h that defines DIR... yes
> > > checking for opendir in -ldir... no
> > > checking for ANSI C header files... yes
> > > checking for arpa/inet.h... yes
> > > checking for arpa/nameser.h... yes
> > > checking for assert.h... yes
> > > checking for bstring.h... no
> > > checking for config.h... no
> > > checking for crypt.h... yes
> > > checking for ctype.h... yes
> > > checking for errno.h... yes
> > > checking for execinfo.h... no
> > > checking for fcntl.h... yes
> > > checking for getopt.h... no
> > > checking for gnumalloc.h... no
> > > checking for grp.h... yes
> > > checking for ip_compat.h... no
> > > checking for ip_fil_compat.h... no
> > > checking for ip_fil.h... no
> > > checking for ip_nat.h... no
> > > checking for libc.h... no
> > > checking for limits.h... yes
> > > checking for linux/netfilter_ipv4.h... no
> > > checking for malloc.h... yes
> > > checking for math.h... yes
> > > checking for memory.h... yes
> > > checking for mount.h... no
> > > checking for net/if.h... yes
> > > checking for netdb.h... yes
> > > checking for netinet/if_ether.h... yes
> > > checking for netinet/in.h... yes
> > > checking for netinet/tcp.h... yes
> > > checking for netinet/ip_compat.h... no
> > > checking for netinet/ip_fil_compat.h... no
> > > checking for netinet/ip_fil.h... no
> > > checking for netinet/ip_nat.h... no
> > > checking for poll.h... yes
> > > checking for pwd.h... yes
> > > checking for regex.h... yes
> > > checking for resolv.h... yes
> > > checking for sched.h... yes
> > > checking for signal.h... yes
> > > checking for stdarg.h... yes
> > > checking for stddef.h... yes
> > > checking for stdio.h... yes
> > > checking for stdlib.h... yes
> > > checking for string.h... yes
> > > checking for strings.h... yes
> > > checking for sys/file.h... yes
> > > checking for sys/ioctl.h... yes
> > > checking for sys/mount.h... yes
> > > checking for sys/msg.h... yes
> > > checking for sys/param.h... yes
> > > checking for sys/resource.h... yes
> > > checking for sys/select.h... no
> > > checking for sys/socket.h... yes
> > > checking for sys/stat.h... yes
> > > checking for sys/statvfs.h... yes
> > > checking for sys/vfs.h... yes
> > > checking for sys/syscall.h... yes
> > > checking for sys/time.h... yes
> > > checking for sys/types.h... yes
> > > checking for sys/un.h... yes
> > > checking for sys/vfs.h... (cached) yes
> > > checking for sys/wait.h... yes
> > > checking for syslog.h... yes
> > > checking for time.h... yes
> > > checking for unistd.h... yes
> > > checking for varargs.h... yes
> > > checking for working const... yes
> > > checking whether byte ordering is bigendian... yes
> > > checking if ANSI prototypes work... yes
> > > checking for tm->tm_gmtoff... no
> > > checking for struct mallinfo... yes
> > > checking for extended mallinfo... no
> > > checking for struct rusage... yes
> > > checking for ip->ip_hl... yes
> > > checking size of int... 4
> > > checking size of long... 4
> > > checking size of void *... 4
> > > checking for working alloca.h... yes
> > > checking for alloca... yes
> > > checking for pid_t... yes
> > > checking for size_t... yes
> > > checking for ssize_t... yes
> > > checking for off_t... yes
> > > checking for mode_t... yes
> > > checking for fd_mask... yes
> > > checking for socklen_t... yes
> > > checking for mtyp_t... no
> > > checking for main in -lnsl... yes
> > > checking for main in -lsocket... no
> > > checking for main in -lgnumalloc... no
> > > checking for main in -lmalloc... yes
> > > checking for main in -lbsd... no
> > > checking for main in -lregex... no
> > > checking for gethostbyname in -lbind... no
> > > checking for inet_aton in -lresolv... no
> > > checking for main in -lresolv... no
> > > checking for main in -lm... yes
> > > checking for crypt in -lcrypt... yes
> > > checking for dlopen in -ldl... no
> > > checking for main in -lpthread... yes
> > > disabling poll for hppa1.1-hp-hpux11.11...
> > > checking for bcopy... yes
> > > checking for backtrace_symbols_fd... no
> > > checking for crypt... yes
> > > checking for fchmod... yes
> > > checking for getdtablesize... yes
> > > checking for getpagesize... yes
> > > checking for getrusage... yes
> > > checking for getspnam... no
> > > checking for lrand48... yes
> > > checking for mallinfo... yes
> > > checking for mallocblksize... no
> > > checking for mallopt... yes
> > > checking for memcpy... yes
> > > checking for memmove... yes
> > > checking for memset... yes
> > > checking for mkstemp... yes
> > > checking for mktime... yes
> > > checking for mstats... no
> > > checking for poll... (cached) no
> > > checking for pthread_attr_setscope... no
> > > checking for pthread_setschedparam... no
> > > checking for pthread_attr_setschedparam... no
> > > checking for pthread_sigmask... no
> > > checking for putenv... yes
> > > checking for random... yes
> > > checking for regcomp... yes
> > > checking for regexec... yes
> > > checking for regfree... yes
> > > checking for res_init... yes
> > > checking for rint... yes
> > > checking for seteuid... no
> > > checking for setgroups... yes
> > > checking for setpgrp... yes
> > > checking for setrlimit... yes
> > > checking for getrlimit... yes
> > > checking for setsid... yes
> > > checking for sigaction... yes
> > > checking for snprintf... yes
> > > checking for srand48... yes
> > > checking for srandom... yes
> > > checking for statfs... yes
> > > checking for sysconf... yes
> > > checking for syslog... yes
> > > checking for timegm... no
> > > checking for vsnprintf... yes
> > > checking if setresuid is implemented... yes
> > > checking if GNUregex needs to be compiled... no
> > > checking for drand48... yes
> > > checking for tempnam... yes
> > > checking for strerror... yes
> > > checking Default FD_SETSIZE value... 2048
> > > checking Maximum number of filedescriptors we can open... 1024
> > > checking Default UDP send buffer size... 65535
> > > checking Default UDP receive buffer size... 65535
> > > checking Default TCP send buffer size... 32768
> > > checking Default TCP receive buffer size... 32768
> > > checking if sys_errlist is already defined... yes
> > > checking for libresolv _dns_ttl_ hack... no
> > > checking if inet_ntoa() actually works... yes
> > > checking for working statvfs() interface... yes
> > > checking for _res.nsaddr_list... yes
> > > updating cache ./config.cache
> > > creating ./config.status
> > > creating ./makefile
> > > creating ./lib/Makefile
> > > creating ./include/config.h
> > > creating ./scripts/Makefile
> > > creating ./scripts/RunCache
> > > creating ./scripts/RunAccel
> > > creating ./src/Makefile
> > > creating ./src/fs/Makefile
> > > creating ./src/fs/ufs/Makefile
> > > creating ./src/repl/Makefile
> > > creating ./src/repl/lru/Makefile
> > > creating ./contrib/Makefile
> > > creating ./icons/Makefile
> > > creating ./errors/Makefile
> > > creating ./auth_modules/Makefile
> > > creating ./auth_modules/LDAP/Makefile
> > > creating ./auth_modules/MSNT/Makefile
> > > creating ./auth_modules/NCSA/Makefile
> > > creating ./auth_modules/PAM/Makefile
> > > creating ./auth_modules/SMB/Makefile
> > > creating ./auth_modules/YP/Makefile
> > > creating ./auth_modules/getpwnam/Makefile
> > > creating include/autoconf.h
> > >
> > >
> > >
> > >
> > >
> > > ********************************************************************
> > >** This email may be confidential and/or privileged. Only the
> > > intended recipient may access or use it. Any dissemination,
> > > distribution or copying of this email is strictly prohibited. If you
> > > are not the intended recipient please notify us immediately by
> > > return email and then erase the email.
> > >
> > > We use virus scanning software but exclude all liability for viruses
> > > or similar in any attachment or message...,..,..,.
> > > ********************************************************************
> > >**

- --
MARA Systems AB, Giving you basic free Squid support
Customized solutions, packaged solutions and priority support
available on request

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjw44lUACgkQ7oQzBsSTDmXcGgCg7P+HJm+8E1SOvv8f03edBdGM
umQAoNsuHHO2cHhbWznNjZ4rHGaW3EHB
=nvXG
-----END PGP SIGNATURE-----
Received on Sun Jan 06 2002 - 17:33:46 MST